Rating:
Information pump assy, injecti Denso
Product
Fuel Injection Pump
Vehicle engine
INDUSTRIAL XA
Engine
XA
Serial start-end
9305-
Info
Injector Nozzle
093500-2120
Manufacture:
S5SS 13 800 MAZDA
Dim 1
3.2-3.4
Dim 2
5.8-6.0
Dim 3
1.0-1.2
Dim 4
Dim 5
Dim 6
Information
Injector nozzle:
0935002120
KIT List:
Part name
Kit1
Kit2
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09600-09210
PUMP ASSY, INJECTI
S5SS 13 800
MAZDA
Include in ##:
09600-09210
as PUMP ASSY, INJECTI
Cross reference number
Part num
Firm num
Firm
Name
09600-09210
S5SS 13 80
PUMP ASSY, INJECTI
0960009210
S5SS 13 800
MAZDA
PUMP ASSY, INJECTI
Information:
DO NOT adjust the linkage so the treadle can be used to shut off the engine. If the operator is in a standing position and places a foot on the treadle, the engine could be unexpectedly shut off, creating a situation where the machine can be difficult to control.
814B, 815B, 816B, 966D
1. Set governor shaft to the off position (approximately 35° right of twelve o'clock) and attach lever (1).2. Adjust cable assembly (2) to within 3 mm (.12 in) of the end of travel and tighten bulkhead (3) nuts to ... 100 15 N m (75 11 lb ft)3. With pedal (4) in off position (approximately 66 3° up from floor plate) attach cable assembly (2) to lever (6).4. Tighten bulkhead nuts at pedal end of cable assembly to ... 100 15 N m (75 11 lb ft)5. Set governor lever (1) to high idle and adjust bolt (5) until it contacts pedal.528
1. Move governor shaft (3) to Shutoff position and install lever (2) on shaft (3) at angle shown.2. Position pedal assembly (1) to dimension A above stop (4) by adjusting rod assembly (5). Dimension A ... 49 1 mm (1.93 .04 in)3. Tighten nut (6) to a torque of ... 45 7 N m (33 5 lb ft)