94901-15270 WASHER, STEEL PLAT Denso Cross

TECHNICAL INFORMATION BULLETIN September 29, 2004
MARINE ENGINES 3508B (S2D S2E S2F)
3512B (S2J S2K S2L S2M S2N)
3516B (S2S S2T S2W S2X S2Y)
Component Code(s) 7620SUBJECT: 3500 A3 (Series 2) Marine Propulsion Software Does Not Perform The Injector Solenoid Test Properly
PROBLEM:
3500 ADEM III (Series 2) marine propulsion engines do not have capability to perform the injector solenoid test (clack test). When the test is initiated, cylinders 1, 2, and 3 perform their respective test properly. When cylinder 4 clacks, all of the rest of the cylinders clack as well. However, Electronic Technician (ET) reports that the test was run successfully. In the factory, cylinder 8 was unplugged and the test was run again. This resulted in the same ET successfully run solenoid test message.
Refer to Table 1 for a list of personality module part numbers containing this issue.
Personality Modules Containing Solenoid Test Issue
Round 2 A3 Primary Round 2 Secondary Round 3 A3 Primary Round 3 Secondary
247-6320 247-6321 250-1400 250-1401
247-6336 247-6337 N/A N/A
247-6338 247-6339 N/A N/A
247-6340 247-6341 250-1404 250-1405
247-6344 247-6345 N/A N/A
247-6346 247-6347 N/A N/A
247-6348 247-6349 N/A N/A
247-6350 247-6351 N/A N/A
247-6378 247-6379 250-1414 250-1415
247-6376 247-6377 N/A N/A
247-6342 247-6343 N/A N/A
247-6352 247-6353 N/A N/A
247-6354 247-6355 N/A N/A
247-6356 247-6357 250-1406 250-1407
247-6358 247-6359 N/A N/A
247-6360 247-6361 N/A N/A
247-6362 247-6363 N/A N/A
247-6364 247-6365 N/A N/A
247-6366 247-6367 N/A