09140-30650 WASHER, LOCK Denso Cross

Illustration 1 g06375067
(A) Old 332-7785 Hose (Outside diameter less than 13.3 mm (0.52 inch))
(B) New 332-7785 Hose (Outside diameter greater than 13.3 mm (0.52 inch))Rework Procedure
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Table 1
Required Parts
Item Qty New Part Number Part Name
1 2 178-7023 Boss
2 4 420-5299 Clip
3 6 520-7003 Clamp
4 1 520-7002 Clamp
Illustration 2 g06375076
Location of CEM and DEF Hoses
Changes to CEM Line Routing for 735C, 745C, 740C EJ, 745, 740 EJ, 740 GC Articulated Trucks
Illustration 3 g06375906
Current hose routing
Illustration 4 g06375907
New hose routing
(C) 416-6221 Bracket As
(D) 344-5360 Clip
Bracket assembly (C) is rotated clockwise by 90 degrees and the loop clip (D) is set vertically up to control hose routing, as shown in Illustration 4.
Illustration 5 g06375908
(D1) 30.62 mm (1.206 inch)
(D2) 80.00 mm (3.150 inch)
(1) 178-7023 Boss
Remove the two single clips from the cooling tube support bracket and add boss (1), per the dimensions shown in Illustration 5.Changes to CEM Line Routing for 725C2 Articulated Trucks
Illustration 6 g06375966
Current hose routing
(E) 3U-2752 Clip
Illustration 7 g06375968
(D3) 32.31 mm (1.272 inch)
(D4) 80.00 mm (3.150 inch)
(1) 178-7023 Boss
Illustration 8 g06375967
New hose routing
(1) 178-7023 Boss
(2) 420-5299 Clip
Remove clip (E) and install boss (1) per the dimensions and secure the hose using two double clips (2), as shown in Illustration 6, Illustration 7, and Illustration 8.Changes to CEM Line Routing for 730C2, 730C2 EJ, 730, and 735 Articulated Trucks