Rating:
Information valve assy, suctio Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$58.68
19 Sep 2024
0.1102[0.05] Pounds
CN: chuanqiwangluokejiyo
SDRMTZA car Part OE:294200-2750 294200-9752 294200-4750 8-98145484-1 8-98145484-0 Fuel Pump Suction Control Valve for ISU/zu/Mits/ubi/shi
SDRMTZA With precision workmanship, durable in use. || Made of materials, good quality || Good compatibility and fits well || Professional accessories for easy operation || Easy to install and disassemble.
SDRMTZA With precision workmanship, durable in use. || Made of materials, good quality || Good compatibility and fits well || Professional accessories for easy operation || Easy to install and disassemble.
$81.66
24 Aug 2024
0.1102[0.05] pounds
CN: CHENG2568MALL
NAttco OE:294200-2750 294200-9752 294200-4750 8-98145484-1 8-98145484-0 Fuel Pump Suction Control Valve Compatible with Isuzu/Compatible with Mitsubishi
NAttco Definition: A hydraulic electromagnetic control valve is a valve that uses electromagnetic force to control the flow of hydraulic oil. || Working principle: The magnetic force generated by the electromagnetic coil drives the spool to move, thereby controlling the switch of the oil circuit. || Direct acting type: electromagnetic force directly acts on the spool. || Interface size: The inlet and outlet size of the valve must match the system pipe. || Flow control: Adjust the flow rate by changing the opening of the valve port.
NAttco Definition: A hydraulic electromagnetic control valve is a valve that uses electromagnetic force to control the flow of hydraulic oil. || Working principle: The magnetic force generated by the electromagnetic coil drives the spool to move, thereby controlling the switch of the oil circuit. || Direct acting type: electromagnetic force directly acts on the spool. || Interface size: The inlet and outlet size of the valve must match the system pipe. || Flow control: Adjust the flow rate by changing the opening of the valve port.
$98.58
11 Jun 2024
0.1102[0.05] Pounds
CN: yangyang24123 mall
Fuel Pump Suction Control OEM 294200-4750 294200-2750 Suction Compatible For HP3 Fuel Pump(294200-4750)
ASDFSDFS The fuel pump is easy to install. Durable, ready to handle tough environments. || Good performance,low noise,provide suitable power and fuel pressure, make you better driving comfortably. || The fuel pump features advanced fluid dynamics for optimal fuel flow and pressure delivery to the engine, improving fuel utilization and reducing energy waste. || The pump is subjected to rigorous testing to evaluate its performance and adherence to quality standards. This includes conducting tests for fuel delivery, pressure regulation, leakage, and overall efficiency. || Fuel Pump Suction Control OEM 294200-4750 294200-2750 Suction Compatible For HP3 Fuel Pump
ASDFSDFS The fuel pump is easy to install. Durable, ready to handle tough environments. || Good performance,low noise,provide suitable power and fuel pressure, make you better driving comfortably. || The fuel pump features advanced fluid dynamics for optimal fuel flow and pressure delivery to the engine, improving fuel utilization and reducing energy waste. || The pump is subjected to rigorous testing to evaluate its performance and adherence to quality standards. This includes conducting tests for fuel delivery, pressure regulation, leakage, and overall efficiency. || Fuel Pump Suction Control OEM 294200-4750 294200-2750 Suction Compatible For HP3 Fuel Pump
Include in ##:
Number on scheme 033
29400-01460
as VALVE ASSY, SUCTIO
Cross reference number
Part num
Firm num
Firm
Name
29420-04750
VALVE ASSY, SUCTIO
Information:
1. Loosen two bolts (2) and two nuts (3). Remove bolt (1), and remove fan drive belts (4). 2. Remove the nuts and bolts that hold the fan drive in place. Remove fan drive (5).Install Fan Drive
1. Put fan drive (1) in position on the timing gear cover. 2. Install bolts (3) and the nuts loosely. Make a replacement of the belts as a set only.3. Install fan belts (4). Install bolt (2). Make an adjustment to the belt tension with tool (A). Measure the belt farthest away from the engine. Tighten new belts to a gauge indication of 120 5. After the engine is operated at high idle for a minimum of 30 minutes, make another adjustment to the belt tension. The correct tension for used belts is a gauge indication of 90 10.3. Tighten bolts (3) and the nuts that hold the fan drive in place.Disassemble Fan Drive
START BY:a. remove fan drive This is a typical later model fan drive. 1. Remove two bolts (2) that hold the fan adapter to the pulley.2. Remove fan adapter (1) from the pulley. 3. Remove bolts (3) and washer (4). Remove seal (5). 4. Remove pulley (8) from bracket (6).5. Remove bearing (10) and spacer (9) from the pulley. Remove spacer (7), seal (11) and bearing (12) from the pulley.Assemble Fan Drive
1. Install bearing (2) in the rear of pulley (3). 2. Install lip-type seal (1) with tooling (A). The lip of the seal must be away from the bearing. Put 5P960 Multipurpose Type Grease on the lip of the seal.3. Install spacer (5) so the end with the taper is toward the inside of pulley (3).4. Install spacer (6) and bearing (4) in the front of the pulley. 5. Put seal (7) on the front of the pulley. Install the pulley on bracket (8). 6. Install washer (10) and bolts (9) that hold the pulley in position.7. Install the fan drive adapter on the pulley.8. Fill the fan drive with 5P960 Multipurpose Type Grease.
1. Put fan drive (1) in position on the timing gear cover. 2. Install bolts (3) and the nuts loosely. Make a replacement of the belts as a set only.3. Install fan belts (4). Install bolt (2). Make an adjustment to the belt tension with tool (A). Measure the belt farthest away from the engine. Tighten new belts to a gauge indication of 120 5. After the engine is operated at high idle for a minimum of 30 minutes, make another adjustment to the belt tension. The correct tension for used belts is a gauge indication of 90 10.3. Tighten bolts (3) and the nuts that hold the fan drive in place.Disassemble Fan Drive
START BY:a. remove fan drive This is a typical later model fan drive. 1. Remove two bolts (2) that hold the fan adapter to the pulley.2. Remove fan adapter (1) from the pulley. 3. Remove bolts (3) and washer (4). Remove seal (5). 4. Remove pulley (8) from bracket (6).5. Remove bearing (10) and spacer (9) from the pulley. Remove spacer (7), seal (11) and bearing (12) from the pulley.Assemble Fan Drive
1. Install bearing (2) in the rear of pulley (3). 2. Install lip-type seal (1) with tooling (A). The lip of the seal must be away from the bearing. Put 5P960 Multipurpose Type Grease on the lip of the seal.3. Install spacer (5) so the end with the taper is toward the inside of pulley (3).4. Install spacer (6) and bearing (4) in the front of the pulley. 5. Put seal (7) on the front of the pulley. Install the pulley on bracket (8). 6. Install washer (10) and bolts (9) that hold the pulley in position.7. Install the fan drive adapter on the pulley.8. Fill the fan drive with 5P960 Multipurpose Type Grease.