Rating:
Information valve assy, suctio Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
YIQONAPEL 294200-0370. 294009-0251. 294200-0460. 294200-0390. 294200-0170. High Pressure Fuel Pump Regulator Suction Control SCV Valve(294200-0170)
YIQONAPEL Wide compatibility: Compatible with a variety of vehicle models and engines. || Fuel atomization enables more complete combustion, providing powerful output. || Low - noise operation: Optimize the internal structure to reduce fuel injection noise. || Utilize technology to respond to engine commands and accurately complete fuel injection. || Stable and dependable: Maintains stable functioning under various operating conditions, ensuring more stable driving.
YIQONAPEL Wide compatibility: Compatible with a variety of vehicle models and engines. || Fuel atomization enables more complete combustion, providing powerful output. || Low - noise operation: Optimize the internal structure to reduce fuel injection noise. || Utilize technology to respond to engine commands and accurately complete fuel injection. || Stable and dependable: Maintains stable functioning under various operating conditions, ensuring more stable driving.
suction control valve OEM 294200-0370 294200-0170 294200-0390 294200-0460 294009-0250 294009-0251 SCV Valve - (Color: 294200-0170)
Generic Color: 294200-0170
Generic Color: 294200-0170
You can buy:
Include in ##:
Number on scheme 033
29400-00462
as VALVE ASSY, SUCTIO
Cross reference number
Part num
Firm num
Firm
Name
29420-00370
VALVE ASSY, SUCTIO
Information:
1. Bend the tabs of the locks from bolts (2) and remove bolts (2) and sleeve (1).2. Remove five bolts (3) from the flywheel housing. 3. Remove the two bolts and remove tachometer drive (8) from flywheel housing (7).4. Remove the five bolts that hold the flywheel housing to the timing gear plate on the left side of the engine.5. Remove two bolts (5), the three bolts (6) and bolt (9).6. Remove the two bolts that hold the flywheel housing to the timing gear plate at the accessory drive on the right side of the engine.7. Remove nuts (4), and use two persons to remove flywheel housing (7). The weight of the flywheel housing is 90 lb. (41 kg).Install Flywheel Housing
1. Clean the surface of the timing gear plate and put the flywheel housing gasket in position. 2. Put flywheel housing (1) in position and install the nuts and bolts to hold it. 3. Tighten two bolts (3) to a torque of 40 5 lb. ft. (55 7 N m). Tighten three bolts (2) to a torque of 95 10 lb. ft. (130 14 N m). 4. Put the O-ring seal (4) on tachometer drive and install the tachometer drive. Make sure tachometer drive is correctly engaged with the drive shaft before the bolts that hold it are tightened. 5. Install sleeve (5) evenly on the crankshaft rear seal and install the bolts and locks to hold it.end by: a) install BrakeSaverb) install BrakeSaver control valvec) install electric starting motord) install air compressore) install oil pan
1. Clean the surface of the timing gear plate and put the flywheel housing gasket in position. 2. Put flywheel housing (1) in position and install the nuts and bolts to hold it. 3. Tighten two bolts (3) to a torque of 40 5 lb. ft. (55 7 N m). Tighten three bolts (2) to a torque of 95 10 lb. ft. (130 14 N m). 4. Put the O-ring seal (4) on tachometer drive and install the tachometer drive. Make sure tachometer drive is correctly engaged with the drive shaft before the bolts that hold it are tightened. 5. Install sleeve (5) evenly on the crankshaft rear seal and install the bolts and locks to hold it.end by: a) install BrakeSaverb) install BrakeSaver control valvec) install electric starting motord) install air compressore) install oil pan