Rating:
Information valve assy, spill Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
096600-0033 Original and valve assy, spill control valve 096600-0033 original solenoid valve
Generic
Generic
$1,085.48
18 Sep 2024
0.1102[0.05] Pounds
CN: qing qing shop q
Car Carburetor Solenoid Valve Kit Compatible For 1KZ 5.0L 096600-0033
CONERY Car Carburetor Solenoid Valve Kit Compatible for 1KZ 5.0L 096600-0033 || Easy to install, no need for complex modifications || Improved the structure during the manufacturing process and achieved high precision || The carburetor can provide maximum power output with the lowest fuel consumption, which helps improve energy efficiency and environmental friendliness || Starting stability: When the vehicle starts, the carburetor can quickly provide the required fuel mixture, allowing the engine to start steadily and reducing the difficulty of starting
CONERY Car Carburetor Solenoid Valve Kit Compatible for 1KZ 5.0L 096600-0033 || Easy to install, no need for complex modifications || Improved the structure during the manufacturing process and achieved high precision || The carburetor can provide maximum power output with the lowest fuel consumption, which helps improve energy efficiency and environmental friendliness || Starting stability: When the vehicle starts, the carburetor can quickly provide the required fuel mixture, allowing the engine to start steadily and reducing the difficulty of starting
$427.50
29 Jun 2024
4.4092[1.98] pounds
CN: kunmingdiancunxiangb
BFNKRUPJ 096600-0033 23032-54020 Solenoid Valve
BFNKRUPJ 1 || Material: paper
BFNKRUPJ 1 || Material: paper
Include in ##:
Number on scheme 007
09650-00082
as VALVE ASSY, SPILL
Cross reference number
Part num
Firm num
Firm
Name
09660-00033
23032-5402
VALVE ASSY, SPILL
Information:
1. Remove the retaining ring (1) and pin (2). 2. Remove the seat (3), bolt (4), washers (5), and spring (6).3. Remove the sleeve and bearing assembly from the cylinder and weight assembly. 4. Remove the retaining ring (7) from sleeve (8).5. Remove the bearing (9) and races (10) from sleeve (8). 6. Remove the valve (11) from piston (12).7. Remove the retaining ring (13) from the cylinder and weight assembly.8. Remove the weight assembly (14).9. Remove piston (12) and sleeve (15) from the cylinder (16).10. Remove the O-ring seal from sleeve (15). 11. Remove the speed limiter plug (17), spring (18), and plunger (19) from the governor housing.12. Remove the high idle screw (21) and low idle screw (20). 13. Remove the bolt and lock that holds the shaft (22) to lever assembly (23).14. Remove the shaft (22) and lever assembly (23) from governor housing.15. Remove the seal and bearings from governor housing. 16. Remove the two bolts (25) and lock. Remove the lever (24) and shaft (26) from idle screw housing.17. Remove the two seals and bearing from idle screw housing.Assemble Governor
1. Install the O-ring seal (3) on sleeve (4).2. Install piston (2) and sleeve (4) in the cylinder (1). 3. Put the weight assembly (6) in position on cylinder (1), and install retaining ring (5). 4. Install valve (8) in piston (2).5. Install the bearing and races in sleeve. Install the retaining ring. Install the sleeve and bearing assembly (7) on valve (8). 6. Put the bolt (10), washers (11), and spring (12) in position in seat (9). 7. Put the holes in seat (9), sleeve and bearing assembly (7), and valve (8) in alignment, and install the pin (13). Install the retaining ring (14). 8. Use tool setup (A) to install the inner seal in idle screw housing with the spring side of seal toward tool setup (A). Use tool setup (A) to install the outer seal in housing with lip of seal toward inside of housing. Put clean oil on the bearing and lip of seals.9. Put the shaft and lever in position in the idle screw housing, and install the bolts and lock. 10. Install the two bearings in governor housing. Use tool setup (A) to install the seal in housing with lip of seal toward inside of the governor housing. Put clean oil on the bearings and lip of seal. 11. Put the shaft (15) and lever assembly (17) in position in governor housing, and install the bolt (16) and lock. Install the high and low idle screws in housing. Install the speed limiter plunger, spring, and plug in housing.end by: a) connection of governor to fuel injection pump housing
1. Install the O-ring seal (3) on sleeve (4).2. Install piston (2) and sleeve (4) in the cylinder (1). 3. Put the weight assembly (6) in position on cylinder (1), and install retaining ring (5). 4. Install valve (8) in piston (2).5. Install the bearing and races in sleeve. Install the retaining ring. Install the sleeve and bearing assembly (7) on valve (8). 6. Put the bolt (10), washers (11), and spring (12) in position in seat (9). 7. Put the holes in seat (9), sleeve and bearing assembly (7), and valve (8) in alignment, and install the pin (13). Install the retaining ring (14). 8. Use tool setup (A) to install the inner seal in idle screw housing with the spring side of seal toward tool setup (A). Use tool setup (A) to install the outer seal in housing with lip of seal toward inside of housing. Put clean oil on the bearing and lip of seals.9. Put the shaft and lever in position in the idle screw housing, and install the bolts and lock. 10. Install the two bearings in governor housing. Use tool setup (A) to install the seal in housing with lip of seal toward inside of the governor housing. Put clean oil on the bearings and lip of seal. 11. Put the shaft (15) and lever assembly (17) in position in governor housing, and install the bolt (16) and lock. Install the high and low idle screws in housing. Install the speed limiter plunger, spring, and plug in housing.end by: a) connection of governor to fuel injection pump housing