09180-04200 TIMER ASSY, AUTOMA Denso Cross


Rating:
16
Buy TIMER ASSY, AUTOMA 09180-04200 genuine, new aftermarket engine parts with delivery

Information timer assy, automa Denso

Scheme #.#:

Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09180-04200
TIMER ASSY, AUTOMA
SB1
001
[01]
HUB, TIMER
002
[02]
WEIGHT SUB-ASSY, T
003
[02]
CAM, TIMER
004
[02]
CAM, TIMER
005
[04]
WASHER, SNAP
ID6.4
006
[01]
FLANGE, TIMER DRIV
006-001
[01]
SEAL, OIL
ID33.6
008
[4C]
SPRING, TIMER SUB
008
[4C]
SPRING, TIMER SUB
009
[02]
SUPPORT, TIMER SPR
010
[01]
COVER SUB-ASSY, TI
-0505
010
[01]
COVER SUB-ASSY, TI
0506-
010-001
[01]
SEAL, OIL
ID36.6
011
[04]
SEAT
012
[04]
SEAT
013
[02]
SCREW, TIMER HUB
M8
014
[01]
PLATE, TIMER DRIVI
015
[02]
ROLLER, TIMER
016
[02]
WASHER, COPPER PLA
T1
017
[8C]
WASHER, PLATE, SK
T0.5
017
[8C]
WASHER, PLATE, SK
T0.6
017
[8C]
WASHER, PLATE, SK
T0.7
017
[8C]
WASHER, PLATE, SK
T0.8
017
[8C]
WASHER, PLATE, SK
T0.9
017
[8C]
WASHER, PLATE, SK
T1.0
017
[8C]
WASHER, PLATE, SK
T1.1
017
[8C]
WASHER, PLATE, SK
T1.2
017
[8C]
WASHER, PLATE, SK
T1.3
017
[8C]
WASHER, PLATE, SK
T1.4
017
[8C]
WASHER, PLATE, SK
T1.5
018
[01]
O-RING
ID110.8

Include in ##:

09180-04200 as TIMER ASSY, AUTOMA

Cross reference number



Part num
Firm num
Firm
Name
09180-04200 
 
TIMER ASSY, AUTOMA




Information:

Introduction
This Special Instruction contains the procedure for contamination test in the Diesel Exhaust Fluid (DEF) system.There have been instances of issues with DEF pumps. After analysis, the cause of the issues has been found as contamination with hydrocarbons.Note: Diesel fuel is an example of a hydrocarbon.The DEF filter is equipped with a compensator located in the center of the filter assembly. If the compensator comes into contact with hydrocarbons, the compensator will swell and is designed to block the filter assembly and protect the DEF pump.Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.Safety Section
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Ensure that the engine is stopped before any servicing or repair is performed. The Diesel Exhaust Fluid (DEF) system must have completed a proper shutdown. Service on the DEF pump prior to completion of a proper shutdown can result in DEF spray and spillage.
Do not turn off the battery disconnect switch until the indicator lamp has turned off. If the switch is turned off when the indicator lamp is illuminated, the Diesel Exhaust Fluid (DEF) system may not shut down properly. If the DEF system does not shut down properly, DEF could freeze and damage the pump and lines.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Cat Dealer Service Tool Catalog" or refer to Special Publication, PECJ0003, "Cat Shop Supplies and Tools Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Clean water should be used to wash spilled DEF off machine components and surfaces.Note: Wear gloves when handling the DEF filter.Contamination Test Procedure
The following procedure is designed to diagnose if the DEF pump has been contaminated with hydrocarbons.
Illustration 1 g06278274
(1) Protective cover
Remove the protective cover (1).
Illustration 2 g06278289
(2) DEF filter cap
Use a suitable tool to remove the DEF filter cap (2).
Illustration 3 g06278325
(3) Compensator
With the filter installed in the DEF pump, carefully remove the compensator (3).
Illustration 4 g06340998
(D1) 38 mm (1.5 inch)
(D2) 97 mm (3.8 inch)
Check the measurements of the compensator (3). Check if the measurements are greater than specified in Illustration 4. This condition indicates that the DEF pump is contaminated with hydrocarbons. The compensator will swell when exposed to hydrocarbons and this will block the flow through the filter. This condition will cause the following codes:
4334-18 DEF Pressure is Low
5435-1 DEF Pump Failed to Prime
If the measurements indicate contamination, replace the DEF pump filter. Refer to Operation and Maintenance Manual, Diesel Exhaust Fluid Filter -

Have questions with 09180-04200?





Group cross 09180-04200

Back to top