09180-01001 TIMER ASSY, AUTOMA Denso Cross


Rating:
12
Buy TIMER ASSY, AUTOMA 09180-01001 genuine, new aftermarket engine parts with delivery

Information timer assy, automa Denso

Scheme #.#:

Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09180-01001
TIMER ASSY, AUTOMA
SA/2SP
000
[01]
09180-01001
TIMER ASSY, AUTOMA
SA/2SP
22610-77040 TOYOTA
001
[01]
HUB ASSY, TIMER
-8009
001
[01]
HUB ASSY, TIMER
-8009
22616-77040 TOYOTA
001
[01]
HUB ASSY, TIMER
8010-
001
[01]
HUB ASSY, TIMER
8010-
002
[02]
SPRING, TIMER
002
[02]
SPRING, TIMER
003
[02]
SPRING, TIMER SUB
003
[02]
SPRING, TIMER SUB
22628-77040 TOYOTA
004
[01]
O-RING
ID115.0
004
[01]
O-RING
ID115.0
90099-14001 TOYOTA
005
[02]
WEIGHT, TIMER
005
[02]
WEIGHT, TIMER
22614-77040 TOYOTA
006
[01]
FLANGE, TIMER DRIV
006
[01]
FLANGE, TIMER DRIV
007
[01]
SEAL, OIL
007
[01]
SEAL, OIL
90099-15005 TOYOTA
008
[01]
SEAL, OIL
008
[01]
SEAL, OIL
90099-15004 TOYOTA
009
[01]
COVER, TIMER
-8104
009
[01]
COVER, TIMER
-8104
22612-77021 TOYOTA
009
[01]
COVER, TIMER
8105-
009
[01]
COVER, TIMER
8105-
010
[02]
WASHER, COPPER PLA
T1
90201-08106 TOYOTA
010
[02]
WASHER, COPPER PLA
T1
90201-08106 TOYOTA
011
[02]
SCREW, TIMER HUB
M8
011
[02]
SCREW, TIMER HUB
M8
22617-77020 TOYOTA
012
[2C]
WASHER, PLATE, SK
T0.5
012
[2C]
WASHER, PLATE, SK
T0.5
90099-01443 TOYOTA
012
[2C]
WASHER, PLATE, SK
T0.2
012
[2C]
WASHER, PLATE, SK
T0.2
90099-30610 TOYOTA
014
[04]
SEAT
014
[04]
SEAT
015
[2C]
WASHER, PLATE, SK
T0.5
015
[2C]
WASHER, PLATE, SK
T0.5
22621-77020 TOYOTA
015
[2C]
WASHER, PLATE, SK
T1.0
015
[2C]
WASHER, PLATE, SK
T1.0
22622-77020 TOYOTA
015
[2C]
WASHER, PLATE, SK
T0.1
015
[2C]
WASHER, PLATE, SK
T0.1
22623-77020 TOYOTA
015
[2C]
WASHER, PLATE, SK
T0.2
015
[2C]
WASHER, PLATE, SK
T0.2
22624-77020 TOYOTA
015
[2C]
WASHER, PLATE, SK
T1.6
015
[2C]
WASHER, PLATE, SK
T1.6
22625-77020 TOYOTA
015
[2C]
WASHER, PLATE, SK
T2.0
015
[2C]
WASHER, PLATE, SK
T2.0
90099-01442 TOYOTA

Include in ##:

09180-01001 as TIMER ASSY, AUTOMA

Cross reference number



Part num
Firm num
Firm
Name
09180-01001 
 
TIMER ASSY, AUTOMA




Information:

1. Loosen the fuel injection line nut at the nozzle end with tool (A).2. Loosen the fuel line nut at the fuel injection line adapter with tool (B). Remove inner fuel injection lines (1). Install caps and plugs on all fuel line openings to keep dirt out of the fuel system. If necessary, use tooling (D) to turn the engine so the valves do not make contact with the pistons when the valves are opened with tool (C) to remove the push rods.3. Put compression on the valve springs with tool (C), and remove push rods (2). Put identification marks on the push rods as to their location in the engine.4. Push the push rod end of the rocker arms down. 5. Remove the intake valve lifter with tooling (E) as follows:a. Install 5P2685 Nut (3) and 5P6601 Collet (4) on 5P2408 Outer Handle Assembly (5).b. Install 5P6599 Inner Handle Assembly (6) in 5P2408 Outer Handle Assembly (5). c. Install tooling (E) in the intake valve lifter. Hold the 5P2408 Outer Handle Assembly, and tighten the 5P6599 Inner Handle Assembly until the 5P6601 Collet is tight against the inside of the intake valve lifter. d. Remove intake valve lifters (7) from the cylinder block with tooling (E). Put identification marks on the lifters as to their location in the engine. 6. Remove the exhaust valve lifters with tooling (E) as follows:a. Install 5P2685 Nut (3) and 5P6601 Collet (4) on 5P2408 Outer Handle Assembly (5). The opening in the cylinder head assembly for the intake valve lifter is larger than the opening in the exhaust valve lifter side. The tooling and each valve lifter must be installed and removed from the intake valve lifter side.b. Install the outer handle assembly in the intake valve lifter side of the cylinder head assembly. Slide the flat area of 5P2408 Outer Handle Assembly (5) through the head casting, and install the 5P6601 Collet in the exhaust valve lifters. c. Install 5P6599 Inner Handle Assembly (6) in 5P2408 Outer Handle Assembly (5). Hold the 5P2408 Handle Assembly, and tighten the 5P6599 Handle Assembly until the 5P6601 Collet is tight against the inside of the exhaust valve lifter.d. Pull the exhaust valve lifter up until the spring on the exhaust valve lifter is free from the cylinder block.e. Remove the 5P6599 Inner Handle Assembly. Slide the 5P2408 Outer Handle Assembly through the head casting, and remove it from the intake valve lifter side of the cylinder head. f. Use a magnet, and remove exhaust valve lifters (8) from the intake valve lifter side of the cylinder head assembly. Put identification marks on the lifters as to their location in the engine.7. Remove the guide springs from the lifters.Install Valve Lifters
Steps 1 and 2 must be done to install intake or exhaust valve lifters.
Make sure

Have questions with 09180-01001?





Group cross 09180-01001

Back to top