Rating:
Information ring sub-assy, rol Denso
TOYOTA
RING SUB-ASSY, ROL
AA
- IN THE ROLLER PIN KIT,NO.2,3,4,5 EACH INCLUDE 4 PIECES.
MITSUBISHI
RING SUB-ASSY, ROL
EA
- IN THE ROLLER PIN KIT,NO.2,3,4,5 EACH INCLUDE 4 PIECES.
MAZDA
RING SUB-ASSY, ROL
FA
- IN THE ROLLER PIN KIT,NO.2,3,4,5 EACH INCLUDE 4 PIECES.
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09618-00050
RING SUB-ASSY, ROL
S503 24 040
MAZDA
000
[01]
09618-00050
RING SUB-ASSY, ROL
000
[01]
09618-00050
RING SUB-ASSY, ROL
22108-54180
TOYOTA
Include in ##:
Cross reference number
Part num
Firm num
Firm
Name
09618-00050
S503 24 04
TOYOTA
RING SUB-ASSY, ROL
0961800050
22108-54180
TOYOTA
RING SUB-ASSY, ROL
0961800050
ME736310
MITSUBISHI
RING SUB-ASSY, ROL
0961800050
S503 24 040
MAZDA
RING SUB-ASSY, ROL
Information:
If no oil pressure is indicated, stop the engine. Engine damage can result.
Oil Pressure - Typical oil pressure range is 30 and 45 psi (207 and 310 kPa) (running at rated engine speed, with SAE 15W-40 oil, at operating temperature). A lower pressure is normal at low idle. Water Temperature - Typical water temperature range is 189° to 208°F (87° to 98°C). Maximum allowable temperature is 216°F (102°C) with the cooling system pressurized. Somewhat higher temperatures may occur under certain conditions. Ammeter - Indicates the amount of charge or discharge in the battery charging circuit. Typical operation of the indicator should be slightly to the positive (right) side of "0" (zero).With the engine running, during normal operation, if the indicator is constantly to the negative (left) side of "0" (zero) or shows excessive charge, have the charging system checked for malfunction.
Do not exceed 2300 rpm in any situation.
Tachometer - Indicates engine rpm (speed). The engine can be operated at high idle without damage, but should not be allowed to overspeed. Overspeeding when downshifting, going downhill, etc., can result in serious damage to your engine. Fuel Level - Indicates fuel level in the fuel tank. Electrically operated, it registers only when the key switch is ON.
A drop in fuel pressure usually indicates a dirty or plugged fuel filter.
Fuel Pressure - Indicates fuel pressure to the unit injectors. The indicator (if equipped) should register in the NORMAL (green) range. Typical fuel pressure at low idle is 60 psi (410 kPa) and at TEL (Top Engine Limit), 80 psi (550 kPa).