Rating:
Information pump assy, supply Denso
Product
Fuel Injection Pump
Vehicle engine
PATHFINDER YD25
Engine
YD25
Serial start-end
0412-
Info
Injector Nozzle
NISSAN MOTOR
PUMP ASSY, SUPPLY
IA
- *1:SHAPE CHANGE OF THE INLET PIPE. IF THE FUEL HOSE
- (CAR PART)IS REPLACED AT THE SAME TIME, THE NEW ONE CAN
- BE USED INSTEAD OF THE OLD ONE.
- #..NEW PARTS ARE INTERCHANGEABLE WITH OLD ONE,
- IF NO.3,4 ARE CHANGED AT THE SAME TIME.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Injection Pump 294000-0370 for Nissan Navara Pathfinder Engine YD25
ADPelcote Part number:294000-0370 || Applications:for Nissan Navara Pathfinder Engine YD25
ADPelcote Part number:294000-0370 || Applications:for Nissan Navara Pathfinder Engine YD25
Fuel Injection Pump 294000-0370 for Nissan Navara Pathfinder Engine YD25
AUCALIWI Part number:294000-0370 || Application:for Nissan Navara Pathfinder Engine YD25
AUCALIWI Part number:294000-0370 || Application:for Nissan Navara Pathfinder Engine YD25
Common Rail Pump 294000-0370 Fuel Injection Pump 16700-EB300 294000-0371 Compatible With Nissan
SYOTOE Small size: small size, easy to install in the limited space of the vehicle. || Convenient installation: the external fuel pump is connected in series in the oil pipeline outside the oil tank, which has great freedom of installation and convenient replacement. || Simple maintenance: some fuel pumps are designed to facilitate daily maintenance, such as cleaning the filter screen easily, which is helpful to prolong their service life. || Good cooling effect: the motor of electric fuel pump is immersed in fuel, which has good cooling effect and is conducive to prolonging the service life of the motor. || Easy to control: the electric fuel pump can be controlled electronically to realize accurate adjustment of fuel flow and pressure, which is more convenient to operate.
SYOTOE Small size: small size, easy to install in the limited space of the vehicle. || Convenient installation: the external fuel pump is connected in series in the oil pipeline outside the oil tank, which has great freedom of installation and convenient replacement. || Simple maintenance: some fuel pumps are designed to facilitate daily maintenance, such as cleaning the filter screen easily, which is helpful to prolong their service life. || Good cooling effect: the motor of electric fuel pump is immersed in fuel, which has good cooling effect and is conducive to prolonging the service life of the motor. || Easy to control: the electric fuel pump can be controlled electronically to realize accurate adjustment of fuel flow and pressure, which is more convenient to operate.
You can buy:
Include in ##:
Cross reference number
Part num
Firm num
Firm
Name
29400-00370
16700EB300
NISSAN MOTOR
PUMP ASSY, SUPPLY
2940000370
16700EB300
NISSAN MOTOR
PUMP ASSY SUPPLY
2940000370
16700EB300
NISSAN MOTOR
PUMP ASSY, SUPPLY
2940000370
16700EB30B
NISSAN MOTOR
PUMP ASSY, SUPPLY
2940000370
16700EB30C
NISSAN MOTOR
PUMP ASSY, SUPPLY
2940000370
16700EB30D
NISSAN MOTOR
PUMP ASSY, SUPPLY
Test Calibration Data:
02EN037000
02EN037000
02EN037000
02EN037000
02EN037000
02EN037000
02EN037000
02EN037000
02EN037000
Information:
1. Remove shaft (2). Remove pin (1) from the shaft.2. Remove pins (3) from the flyweights. Remove flyweights (4). 3. Remove ring, races (6) and the bearing from riser (follower) (5). 4. Remove cover (7) and spring (8) from the governor housing. There is force on the cover from the spring.5. Remove seal (9) from the cover. 6. Remove cover (10) for the low and high idle adjustments.7. Remove locknut and screw (13) for the high idle adjustment.8. Remove bolt (15) and the washers for the low idle adjustment.9. Remove spring (16) and the guide.10. Remove pin (14) and plate (11).11. Remove shaft (12) from the housing. 12. Remove two spacers (17) and pin (18) from the shaft. 13. Remove shaft (19) from the governor housing.14. Remove washer (20) and levers (21) and (22) from the governor housing. 15. Remove seal (23) and the bearing.16. Remove seals (24) and (25) from the governor housing.Assemble Governor
1. Install the bearing and seal in the housing with tool (A). The lip of the seal must be toward the bearing. 2. Install seal (1) in housing with tool (A). The lip of the seal must be toward inside of housing.3. Install seal (2) in the housing with tool (B). The lip of the seal must be toward the inside of the housing. 4. Install shaft (3) in the housing. 5. Install plates (4), spacers (8) and pin (7) on shaft (5).6. Install shaft (5) in the housing and through washer (9) and levers (6). 7. Install pin (11) in the holes of the plates.8. Install screw (10) and the locknut for the high idle adjustment.9. Install spring (13) and the guide.10. Install bolt (12) and the washer for the low idle adjustment.11. Push plate and pin (11) over toward bolt (12) and tighten the bolt. 12. Install the seal in cover (14) with tooling (B). The lip of the seal must be toward the inside. 13. Install spring (15) in the cover. Install cover (14) on the housing.
Spring (15) must be installed with the end of the spring in the position shown.
14. Install the cover (16) for the idle adjustment screws. 15. Install bearing (19) between races (18) on riser (follower) (17). Install ring (20). Ring (20) holds the washers on the riser (follower).16. Install the pin in shaft (23). 17. Install flyweights (22) and pin (21).18. Install shaft (23) in the flyweight assembly.end by: a) connection of governor to fuel injection pump housingb) Make adjustment of fuel system setting (See Fuel System Setting in Testing and Adjusting.)
1. Install the bearing and seal in the housing with tool (A). The lip of the seal must be toward the bearing. 2. Install seal (1) in housing with tool (A). The lip of the seal must be toward inside of housing.3. Install seal (2) in the housing with tool (B). The lip of the seal must be toward the inside of the housing. 4. Install shaft (3) in the housing. 5. Install plates (4), spacers (8) and pin (7) on shaft (5).6. Install shaft (5) in the housing and through washer (9) and levers (6). 7. Install pin (11) in the holes of the plates.8. Install screw (10) and the locknut for the high idle adjustment.9. Install spring (13) and the guide.10. Install bolt (12) and the washer for the low idle adjustment.11. Push plate and pin (11) over toward bolt (12) and tighten the bolt. 12. Install the seal in cover (14) with tooling (B). The lip of the seal must be toward the inside. 13. Install spring (15) in the cover. Install cover (14) on the housing.
Spring (15) must be installed with the end of the spring in the position shown.
14. Install the cover (16) for the idle adjustment screws. 15. Install bearing (19) between races (18) on riser (follower) (17). Install ring (20). Ring (20) holds the washers on the riser (follower).16. Install the pin in shaft (23). 17. Install flyweights (22) and pin (21).18. Install shaft (23) in the flyweight assembly.end by: a) connection of governor to fuel injection pump housingb) Make adjustment of fuel system setting (See Fuel System Setting in Testing and Adjusting.)