19100-00961 PUMP ASSY, INJECTI Calibration Data

Introduction
Do not perform any procedure in this Special Instruction until you have read this information and you understand this information.Required Parts
Table 1
Required Parts    
Item     Qty     New Part Number     Part Name    
1     2     137-8101     O-Ring Seal    
2     2     286-5030     Elbow    
3     1     289-3891     Clip    
4     1     294-6118     Pressure Sensor    
5     1     356-0920     Bracket    
6     2     3J-7352     Connector    
7     2     6V-5048     O-Ring Seal    
8     2     8T-0267     Bolt    
9     2     9X-8267     Washer    
10         108-9656     Cable Straps    
11     2     5P-1717     Hose Clamp    
12     1     356-6802     Sensor Harness As    
13     1     289-3891     Clip    
14     2     5P-3860     Hose Clamp    Procedure
Illustration 1 g02082554
Example of a vertical filter group (1) Connection for the pressure sensor group (2) New bypass wiring harness (3) Connection for the mounted sensor group (4) OEM wiring harness connection (5) OEM wiring harness (6) Wire for the probe of the outlet temperature is secured to the new P1 tube. (7) Support bracket for the new P1 tube (8) New P1 tube (9) The wire for the probe for the inlet temperature is secured to new P1 tube. (10) New P2 tubeNote: Avoid placing