Rating:
Information pump assy, injecti Denso
Product
Fuel Injection Pump
Vehicle engine
INDUSTRIAL S3E
Engine
S3E
Serial start-end
8307--8506
Info
Injector Nozzle
093500-1700
Injector nozzle:
0935001700
KIT List:
Part name
Kit1
Kit2
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
Cross reference number
Part num
Firm num
Firm
Name
19000-07690
PUMP ASSY, INJECTI
Information:
Overcooling
Possible Causes/Corrections Long Idle PeriodsWhen the engine is running with no load, only a small quantity of fuel is burnt and engine heat is removed too fast. Very Light LoadVery light loads, and a very slow speed or downhill travel can cause overcooling because of the low heat input of the engine. The installation of shutters helps to correct this condition. Defective Water Temperature RegulatorsA regulator that is "stuck" open (will not move to the closed position) will cause overcooling. A thermostat that is stuck between the open and closed positions, or only opens part of the way, can cause overcooling when the truck has a light load. Also, coolant leaks around the thermostat, such as vent lines, can cause overcooling. Shunt Line ConnectionThe shunt line may be connected in the wrong place (top hole on bypass housing). Refer to Installation Drawings, LEBT2480, for the proper connection point.
Possible Causes/Corrections Long Idle PeriodsWhen the engine is running with no load, only a small quantity of fuel is burnt and engine heat is removed too fast. Very Light LoadVery light loads, and a very slow speed or downhill travel can cause overcooling because of the low heat input of the engine. The installation of shutters helps to correct this condition. Defective Water Temperature RegulatorsA regulator that is "stuck" open (will not move to the closed position) will cause overcooling. A thermostat that is stuck between the open and closed positions, or only opens part of the way, can cause overcooling when the truck has a light load. Also, coolant leaks around the thermostat, such as vent lines, can cause overcooling. Shunt Line ConnectionThe shunt line may be connected in the wrong place (top hole on bypass housing). Refer to Installation Drawings, LEBT2480, for the proper connection point.