Rating:
Information pump assy, injecti Denso
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09300-03012
PUMP ASSY, INJECTI
A4,R801
9309-
ME016425
MITSUBISHI
Include in ##:
09300-03012
as PUMP ASSY, INJECTI
Cross reference number
Part num
Firm num
Firm
Name
09300-03012
ME016425
PUMP ASSY, INJECTI
Test Calibration Data:
0930003010
ME016425
0930003012
Information:
Introduction
The permanent solution for the problem that is identified below is not known. Until the permanent solution is known, use the solution that is identified below.Problem
The above listed serial numbers have had issues with metal shavings in the Hydraulic Electronic Unit Injector (HEUI) oil passages. These shavings were left in the HEUI oil passages as a result of a nozzle that was not operating correctly.Solution
Return 0R-8849 Cylinder Head Gp with date codes 09006 through date code 12006. Return the 0R-7907 Cylinder Block Gp with the following sequence numbers.
Table 1
Sequence Numbers
01650 01649 01648 01647 01646
01645 01644 01642 01641 01636
01635 01630 01628 01627 01626
01625 01618 01617 01614 01613
01610 01609 01608 01607 01606
01605 01603 01602 01600 01599
01598 01597 01595 01592 Note: If cylinder blocks or cylinder heads have been installed, do not replace the cylinder heads. Instead, flush the HEUI oil system and replace all of the fuel injectors.
The permanent solution for the problem that is identified below is not known. Until the permanent solution is known, use the solution that is identified below.Problem
The above listed serial numbers have had issues with metal shavings in the Hydraulic Electronic Unit Injector (HEUI) oil passages. These shavings were left in the HEUI oil passages as a result of a nozzle that was not operating correctly.Solution
Return 0R-8849 Cylinder Head Gp with date codes 09006 through date code 12006. Return the 0R-7907 Cylinder Block Gp with the following sequence numbers.
Table 1
Sequence Numbers
01650 01649 01648 01647 01646
01645 01644 01642 01641 01636
01635 01630 01628 01627 01626
01625 01618 01617 01614 01613
01610 01609 01608 01607 01606
01605 01603 01602 01600 01599
01598 01597 01595 01592 Note: If cylinder blocks or cylinder heads have been installed, do not replace the cylinder heads. Instead, flush the HEUI oil system and replace all of the fuel injectors.