09210-02250 PUMP ASSY, FUEL FE Denso Cross

Do not bend or add stress the shaft when the nut is loosened or tightened.
d. Loosen the nut on the shaft.e. Tighten nut to ... 3.5 N m (30 lb in)f. Tighten the nut an additional ... 120°g. Remove the nut from the shaft.h. Use 6V1541 Quick Cure Primer on the threads of the shaft and nut.i. Put 9S3265 Retaining Compound on the threads of the shaft and nut.j. Again tighten the nut to ... 3.5 N m (30 lb in)k. Again tighten the nut and additional ... 120°(2) Torque for the bolts that hold back plate ... 4 0.5 N m (35 4 lb in)(3) Torque for the clamp bolts ... 14 1 N m (10 1 lb ft)(4) Put 5P3931 Anti-Seize Compound on the threads and tighten the turbine housing bolts to a torque of ... 20 1 N m (15 1 lb ft)(5) Put 5P3931 Anti-Seize Compound on the threads and tighten the bolts that hold the turbocharger to the manifold to a torque of ... 54 5 N m (40 4 lb ft)(6) End play for shaft: Minimum permissible (new) ... 0.15 mm (.006 in)Maximum Permissible (worn) ... 0.28 mm (.011 in)(7) Bore in the bearing (new) ... 15.921 to 15.931 mm (.6268 to .6272 in) Diameter of shaft (new) ... 15.875 to 15.885 mm (.6250 to .6254 in)(8) Bore in housing (new) ... 24.961 24.973 mm (.9827 .9832 in) Outside diameter