09200-01770 PUMP ASSY, INJECTI Calibration Data

Do not use more than 55 kPa (8 psi) of air pressure in the fuel tank or damage to the tank may result.
Check for leaks at the connections between the fuel tank and the transfer pump. If leaks are found, tighten the connections or replace the lines. If there are no visual leaks, remove the fuel supply line from the tank and connect to an outside fuel supply. If this corrects the problem, the suction (standpipe) inside of the fuel tank has a leak.4. Low quality fuel: Remove a small amount of fuel from the tank and check for water in the fuel. If there is water in the fuel, remove fuel from the tank until the tank is free of water. Change the fuel filter and fill the fuel tank with a good quality fuel. The fuel