Rating:
Information over-haul kit, pum Denso
Product
Fuel Injection Pump
Vehicle engine
COMMON
Engine
Serial start-end
Info
A6,16.8
Injector Nozzle
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
19044-00350
OVER-HAUL KIT, PUM
A6:COLD SPEC
Include in ##:
19044-00350
as OVER-HAUL KIT, PUM
Cross reference number
Part num
Firm num
Firm
Name
19044-00350
OVER-HAUL KIT, PUM
Use as kit:
Assy
Denso
Part name
Kit1
Kit2
Information:
(1) End play for shaft (new) ... 0.114 0.038 mm (.0045 .0015 in) Maximum permissible end play (worn) ... 0.20 mm (.008 in)(2) Thickness of thrust bearing (where thrust rings contact bearing) ... 5.36 0.03 mm (.211 .001 in)(3) Diameter of shaft (new) ... 15.997 to 16.005 mm (.6298 to .6301 in) Bore in the bearing (new) ... 16.035 to 16.043 mm (.6313 to .6316 in)Maximum permissible clearance between bearing and shaft (worn) ... 0.05 mm (.002 in)(4) Maximum permissible gap of oil seal ring, measured in bore of housing ... 0.25 mm (.010 in)(5) Install the compressor wheel (at room temperature) as follows: a. Put compressor wheel on the shaft.b. Put a small amount of clean engine oil on the threads.c. Tighten the