Rating:
Information over-haul kit, dis Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$99.99
06 Sep 2024
0.1102[0.05] pounds
CN: laiyong1987
5 Sets (4 Pieces/Set), Compatible for Diesel Fuel Spare Part,VE Pump Part Roller Assy 096010-0930, Roller Assembly,Consists of 4 Parts
ZYKHPSYA Low noise and vibration: The fuel injection nozzle reduces engine noise and vibration by utilizing a more precise combustion process, providing a smoother and quieter driving environment. || Quick start: The fuel injection nozzle is able to supply fuel to the engine more quickly during startup, helping to reduce wear and tear during cold starts. || Optimized acceleration performance: The fuel injection nozzle is capable of delivering greater power output during acceleration, enhancing the vehicle's acceleration performance. || High-precision injection: The fuel injection nozzle can atomize fuel with extremely high precision, ensuring each step of combustion is optimized. || Easy to clean and maintain: The fuel injection nozzle is designed with simplicity, making it convenient to clean and maintain, thereby prolonging its lifespan and reducing the cost of repairs.
ZYKHPSYA Low noise and vibration: The fuel injection nozzle reduces engine noise and vibration by utilizing a more precise combustion process, providing a smoother and quieter driving environment. || Quick start: The fuel injection nozzle is able to supply fuel to the engine more quickly during startup, helping to reduce wear and tear during cold starts. || Optimized acceleration performance: The fuel injection nozzle is capable of delivering greater power output during acceleration, enhancing the vehicle's acceleration performance. || High-precision injection: The fuel injection nozzle can atomize fuel with extremely high precision, ensuring each step of combustion is optimized. || Easy to clean and maintain: The fuel injection nozzle is designed with simplicity, making it convenient to clean and maintain, thereby prolonging its lifespan and reducing the cost of repairs.
Include in ##:
Number on scheme 020
09618-00020
as OVER-HAUL KIT, DIS
Cross reference number
Part num
Firm num
Firm
Name
09601-00930
OVER-HAUL KIT, DIS
Information:
Start By:a. remove valve cover 1. Remove the cover from the flywheel housing and install Tool (A). Turn the crankshaft with Tool (A) until there is no pressure on rocker arm (2).2. Use Tool (B) as shown to move the rocker arm away from push rod (1). Remove push rod (1). 3. Install Tool (C) on the valve lifter. Remove valve lifter (3) from the block. 4. Remove spring guide (4) from the valve lifter.5. Do Steps 1 through 4 again for the other valve lifters and push rods if necessary.Install Valve Lifters & Push Rods
Any time the valve lifter is removed from the machine, a new spring guide must be installed on the valve lifter.1. Install spring guide (1) on valve lifter (2). 2. Put the valve lifter in position on Tool (A) as shown. Make sure spring guide (1) is in position in the groove (slot) in the valve lifter as shown. 3. Use a soft hammer to install Tool (B) over spring guide (1). Make sure the groove in Tool (B) is in alignment with spring guide (1). 4. Put clean engine oil on valve lifter (2). Use Tool (B) to install the valve lifter in the engine block. Make sure the end of the spring guide is in alignment with the small hole in the block.5. When the valve lifter is in position in the block, use Tool (C) to push the valve lifter off of Tool (C). 6. Use Tool (E) to turn the crankshaft to make sure there is not pressure on the push rods and rocker arms.7. Put push rod (3) in position in the block. Use Tool (D) to move rocker arm (4) away from the push rod far enough to put push rod (3) in position under the rocker arm.End By:a. install valve cover
Any time the valve lifter is removed from the machine, a new spring guide must be installed on the valve lifter.1. Install spring guide (1) on valve lifter (2). 2. Put the valve lifter in position on Tool (A) as shown. Make sure spring guide (1) is in position in the groove (slot) in the valve lifter as shown. 3. Use a soft hammer to install Tool (B) over spring guide (1). Make sure the groove in Tool (B) is in alignment with spring guide (1). 4. Put clean engine oil on valve lifter (2). Use Tool (B) to install the valve lifter in the engine block. Make sure the end of the spring guide is in alignment with the small hole in the block.5. When the valve lifter is in position in the block, use Tool (C) to push the valve lifter off of Tool (C). 6. Use Tool (E) to turn the crankshaft to make sure there is not pressure on the push rods and rocker arms.7. Put push rod (3) in position in the block. Use Tool (D) to move rocker arm (4) away from the push rod far enough to put push rod (3) in position under the rocker arm.End By:a. install valve cover