09107-11420 LEVER, ADJUSTING Denso Cross

Introduction
This Special Instruction provides the rework procedure for the replacement of the fuel transfer pump that is located on the HEUI pump. The procedure calls for a temporary bolt that is used during the removal of the fuel transfer pump in order to prevent the body of HEUI pump from separating. Once the fuel transfer pump has been reinstalled onto the HEUI pump, the temporary bolt is then removed.
The correct procedures and tooling specifications must always be used. Failure to follow any of the procedures may result in damage, malfunction, or possible engine failure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Table 1
Required Tools    
Callout     Part Number     Description    
A     193-9199     T27 Torx bit    
B     194-3536     T40 Torx bit    
C         6 mm Hex Key Wrench    
        Flat head screwdriver    
        Torque Wrench    
        Torque Wrench    
    1U-6396     O-Ring Assembly Compound    Note: Use the following procedure when you install the 326-1006 Fuel Transfer Pump Kit , 326-1007 Fuel Transfer Pump Kit or 326-1008 Cover Kit . The 326-1006 Fuel Transfer Pump Kit is a replacement for the 178-2357 Fuel Transfer Pump Gp . The 326-1007 Fuel Transfer Pump Kit is a replacement for the 272-0617 Fuel Transfer Pump Gp . The 326-1008 Cover Kit is a replacement for the 201-4227 Cover As . Reference parts identification in SISWeb for the engine serial number that is being repaired in order to verify the part number of the fuel transfer pump that is currently installed on the engine.
Table 2
Required Components    
Part Number     Description     Qty    
326-1006, 326-1007 or 326-1008     Fuel Transfer Pump Kit     1    
Table 3
326-1006 Fuel Transfer Pump Kit    
Part Number     Description