Rating:
Information injector assy Denso
Product
Injector
Vehicle engine
MURANO YD2K3
Engine
YD2K3
Serial start-end
1001-
Info
Injector Nozzle
Product
Injector
Vehicle engine
NAVARA YD2K3
Engine
YD2K3
Serial start-end
0912-
Info
Injector Nozzle
Product
Injector
Vehicle engine
PATHFINDER YD2K3
Engine
YD2K3
Serial start-end
0912-
Info
Injector Nozzle
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Diesel Injector Overhaul Kit For Denso For Nissan Navara D40 G3 Injektor Repair Parts 295050-0300 16600-5X00A 16600-5X00D 5X01A - (Style: A, Color: For 16600-5X01A)
Generic Color: For 16600-5X01A
Generic Color: For 16600-5X01A
4X Common Rail Diesel Fuel Injector Nozzle 295050-0300 2950500300 16600-5X00A 166005X00A Compatible For Nissan Navara 2.5d YD25DDT(16600-5X00D)
ULHFTYR 1. 4X Common Rail Diesel Fuel Injector Nozzle 295050-0300 2950500300 16600-5X00A 166005X00A Compatible For Nissan Navara 2.5d YD25DDT || 2. Made of high-quality plastic and metal || 3. Fuel injectors can evenly distribute gasoline or diesel, allowing the engine to operate at optimal fuel efficiency || 4. If the car fuel injector is damaged, broken, blocked and cannot be repaired, or there is a fuel leakage problem, please replace the injector. || 5. The installation of our product is also very simple, just remove the damaged fuel injector and install it.
ULHFTYR 1. 4X Common Rail Diesel Fuel Injector Nozzle 295050-0300 2950500300 16600-5X00A 166005X00A Compatible For Nissan Navara 2.5d YD25DDT || 2. Made of high-quality plastic and metal || 3. Fuel injectors can evenly distribute gasoline or diesel, allowing the engine to operate at optimal fuel efficiency || 4. If the car fuel injector is damaged, broken, blocked and cannot be repaired, or there is a fuel leakage problem, please replace the injector. || 5. The installation of our product is also very simple, just remove the damaged fuel injector and install it.
You can buy:
Cross reference number
Part num
Firm num
Firm
Name
2950500300
166005X00A
NISSAN MOTOR
INJECTOR ASSY
Information:
1. Open the bleed valve on the pump housing. 2. Unscrew the hand priming pump plunger until it can be pulled out by hand. 3. Move the plunger in and out until fuel flows, free of air bubbles, from the bleed valve. 4. Close the bleed valve. 5. Push the plunger in and tighten by hand.6. Start the engine and check for leaks.Injection Pumps and Lines
The injection pumps and high pressure lines must be primed if the engine will not start, or runs rough, after priming the filters and pump housing.Each injection pump has a reverse flow check valve. These cannot be opened with hand priming pump pressure. Use the following procedure to prime the injection pumps and lines.
The fuel injection nozzles can be permanently damaged by twisting if only one wrench is used to loosen or tighten the fuel line nuts. Use one wrench to hold the nozzle and another to loosen the nut.
1. Loosen each of the fuel line nuts at the cylinder head end.2. Crank the engine with the starting motor until fuel flows, free of air bubbles, from each of the injection lines. Stop cranking the engine.3. Tighten each of the fuel line nuts to a torque of 41 + 7 N m (30 + 5 lb. ft.). Use a second wrench on the nozzle to prevent damage to it.4. Start the engine and check for leaks.
The injection pumps and high pressure lines must be primed if the engine will not start, or runs rough, after priming the filters and pump housing.Each injection pump has a reverse flow check valve. These cannot be opened with hand priming pump pressure. Use the following procedure to prime the injection pumps and lines.
The fuel injection nozzles can be permanently damaged by twisting if only one wrench is used to loosen or tighten the fuel line nuts. Use one wrench to hold the nozzle and another to loosen the nut.
1. Loosen each of the fuel line nuts at the cylinder head end.2. Crank the engine with the starting motor until fuel flows, free of air bubbles, from each of the injection lines. Stop cranking the engine.3. Tighten each of the fuel line nuts to a torque of 41 + 7 N m (30 + 5 lb. ft.). Use a second wrench on the nozzle to prevent damage to it.4. Start the engine and check for leaks.