Rating:
Information injector assy Denso
Product
Injector
Vehicle engine
FORWARD 4H07
Engine
4H07
Serial start-end
1004-
Info
Injector Nozzle
Product
Injector
Vehicle engine
INDUSTRIAL 4H07
Engine
4H07
Serial start-end
1004-
Info
Injector Nozzle
Product
Injector
Vehicle engine
N SERIES 4H07
Engine
4H07
Serial start-end
1004-
Info
Injector Nozzle
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Common Rail Diesel Fuel Injector 095000-8930 8-98160061-0 8-98160061-1 8-98160061-2
HRVYQMRF Our fuel injectors provide precise fuel injection to optimize engine performance and fuel efficiency. || Each injector undergoes rigorous flow, injection mode, and leakage testing to ensure reliable performance. || The fuel injector sprays fuel in the form of fine mist, helping the fuel mix more effectively with the air and achieve complete combustion. || It can accurately control the fuel injection quantity and injection time. This precision ensures better performance, higher fuel economy, and lower emissions. || Common Rail Diesel Fuel Injector 095000-8930 8-98160061-0 8-98160061-1 8-98160061-2
HRVYQMRF Our fuel injectors provide precise fuel injection to optimize engine performance and fuel efficiency. || Each injector undergoes rigorous flow, injection mode, and leakage testing to ensure reliable performance. || The fuel injector sprays fuel in the form of fine mist, helping the fuel mix more effectively with the air and achieve complete combustion. || It can accurately control the fuel injection quantity and injection time. This precision ensures better performance, higher fuel economy, and lower emissions. || Common Rail Diesel Fuel Injector 095000-8930 8-98160061-0 8-98160061-1 8-98160061-2
095000-8930 095000-8933 Diesel Fuel Injector Assy 8981600613 8-98160061-3.Compatible For Isuzu Engine 4HK1 6HK1
WWEIMNS OEM : 095000-8930 095000-8933 || Porous fuel injectors can quickly start in cold environments. Reduce flow fluctuations and achieve precise fuel control. || Smaller fuel particles can reduce the fuel consumption of the engine, thereby improving engine performance. Additional fuel protection and engine performance optimization. || Features: The fuel injector ensures quick start-up in cold environments and reduces current fluctuations to obtain accurate fuel. Injectors with flow matched injectors have internal sealing rings to prevent fuel exposure and minimize "sticking" during use || Longer service life. || We are a professional supplier of automotive parts. If you have any needs, please feel free to ask our customer service. When placing an order, please indicate your vehicle model and year. It would be even better if you could attach a photo of the fuel injector you are currently using.
WWEIMNS OEM : 095000-8930 095000-8933 || Porous fuel injectors can quickly start in cold environments. Reduce flow fluctuations and achieve precise fuel control. || Smaller fuel particles can reduce the fuel consumption of the engine, thereby improving engine performance. Additional fuel protection and engine performance optimization. || Features: The fuel injector ensures quick start-up in cold environments and reduces current fluctuations to obtain accurate fuel. Injectors with flow matched injectors have internal sealing rings to prevent fuel exposure and minimize "sticking" during use || Longer service life. || We are a professional supplier of automotive parts. If you have any needs, please feel free to ask our customer service. When placing an order, please indicate your vehicle model and year. It would be even better if you could attach a photo of the fuel injector you are currently using.
$289.97
14 Nov 2024
0.1102[0.05] Pounds
CN: yingzih0316082
XQXCKYDK 095000-8930/095000-8933 Diesel Fuel Injector Assy 8981600613/8-98160061-3 Compatible with Isuzu Engine 4HK1 6HK1
XQXCKYDK Part type:Direct replacement || Package Contents:1 x Diesel Fuel Injector || Compatible With Isuzu Engine 4HK1 6HK1 || Part Number: 8981600613 / 8-98160061-3 / 095000-8930 / 095000-8933 || The fuel injector adopts advanced fuel injection technology, which can achieve precise fuel injection quantity control, ensure full combustion of fuel, improve fuel utilization, and thus reduce fuel consumption
XQXCKYDK Part type:Direct replacement || Package Contents:1 x Diesel Fuel Injector || Compatible With Isuzu Engine 4HK1 6HK1 || Part Number: 8981600613 / 8-98160061-3 / 095000-8930 / 095000-8933 || The fuel injector adopts advanced fuel injection technology, which can achieve precise fuel injection quantity control, ensure full combustion of fuel, improve fuel utilization, and thus reduce fuel consumption
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09500-08930
INJECTOR ASSY
8-98160061-0
ISUZU
Include in ##:
09500-08930
as INJECTOR ASSY
Nozzle Specification:
Parts number
0950008930 ISUZU
Nozzle
First opm
First op
Second om
Second op
-
Torquen
Torque
Prelift
Max lift
Engine
Construction machine 6HK1
Information
Cross reference number
Part num
Firm num
Firm
Name
09500-08930
8-98160061
INJECTOR ASSY
0950008930
8-98160061-0
ISUZU
INJECTOR ASSY
0950008930
8-98160061-1
ISUZU
INJECTOR ASSY
0950008930
8-98160061-2
ISUZU
INJECTOR ASSY
Information:
Start By:a. remove oil pumpb. remove oil pan plate
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove No. 1, 3, 5 and 7 main bearing caps (1). Remove the lower halves of the main bearings from the main bearing caps.
If the crankshaft is turned in the wrong direction, the tab on the bearing will be pushed between the crankshaft and the bearing area in the cylinder block. This can result in damage to the cylinder block and/or the crankshaft.
2. Install tool (A) in the hole in the crankshaft journal, and turn the crankshaft to remove the upper halves of main bearings (2).3. Remove crankshaft thrust bearings (3). Install the main bearings dry when the clearance checks are made. Put clean engine oil on the main bearings for final assembly.
Make sure the upper and lower halves of the main bearings are installed so the bearing tabs fit into the notch in the cylinder block and the main bearing caps.
4. Use tool (A), and install new upper halves of main bearings (2) in the cylinder block. Install new lower halves of main bearings (2) in main bearing caps (1).
When the bearing clearance is checked and the engine is in an upright position (vertical position with cylinder head on top), the crankshaft will have to be lifted up and held against the upper halves of the main bearings to get a correct measurement with the Plastigage. The Plastigage will not hold the weight of the crankshaft and give a correct indication. If the engine is in a horizontal position, it is not necessary to hold the crankshaft up. Do not turn the crankshaft when the Plastigage is in position to check clearances.
For complete details concerning measuring bearing clearances, see Engine Bearings And Crankshafts, Form No. SEBD0531.5. Check the main bearing clearance with Plastigage (B) as follows:a. Put a piece of Plastigage (B) on the crankshaft journals as shown.
Make sure the part number on the main bearing cap is toward the front of the engine and the number on the main bearing cap is the same as the number on the cylinder block on the left side of each main bearing cap.
b. Put main bearing caps (1) in position in the engine. Put 2P2506 Thread Lubricant on the bolt threads and the face of the washers, and install the bolts. Tighten the bolts to a torque of 40 4 N m (30 3 lb ft).c. Put a mark on each bolt and main bearing cap; then tighten the bolts 90° more.d. Remove the main bearing caps, and measure the Plastigage to find the bearing clearance. The main bearing clearance for new bearings must be 0.076 to 0.165 mm (.0030 to .0065 in). Maximum permissible clearance with used bearings is 0.25 mm (.010 in). 6. Put clean oil on the thrust bearing, and install a new thrust bearing for the rear main bearing. Install the thrust bearing with the identification
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove No. 1, 3, 5 and 7 main bearing caps (1). Remove the lower halves of the main bearings from the main bearing caps.
If the crankshaft is turned in the wrong direction, the tab on the bearing will be pushed between the crankshaft and the bearing area in the cylinder block. This can result in damage to the cylinder block and/or the crankshaft.
2. Install tool (A) in the hole in the crankshaft journal, and turn the crankshaft to remove the upper halves of main bearings (2).3. Remove crankshaft thrust bearings (3). Install the main bearings dry when the clearance checks are made. Put clean engine oil on the main bearings for final assembly.
Make sure the upper and lower halves of the main bearings are installed so the bearing tabs fit into the notch in the cylinder block and the main bearing caps.
4. Use tool (A), and install new upper halves of main bearings (2) in the cylinder block. Install new lower halves of main bearings (2) in main bearing caps (1).
When the bearing clearance is checked and the engine is in an upright position (vertical position with cylinder head on top), the crankshaft will have to be lifted up and held against the upper halves of the main bearings to get a correct measurement with the Plastigage. The Plastigage will not hold the weight of the crankshaft and give a correct indication. If the engine is in a horizontal position, it is not necessary to hold the crankshaft up. Do not turn the crankshaft when the Plastigage is in position to check clearances.
For complete details concerning measuring bearing clearances, see Engine Bearings And Crankshafts, Form No. SEBD0531.5. Check the main bearing clearance with Plastigage (B) as follows:a. Put a piece of Plastigage (B) on the crankshaft journals as shown.
Make sure the part number on the main bearing cap is toward the front of the engine and the number on the main bearing cap is the same as the number on the cylinder block on the left side of each main bearing cap.
b. Put main bearing caps (1) in position in the engine. Put 2P2506 Thread Lubricant on the bolt threads and the face of the washers, and install the bolts. Tighten the bolts to a torque of 40 4 N m (30 3 lb ft).c. Put a mark on each bolt and main bearing cap; then tighten the bolts 90° more.d. Remove the main bearing caps, and measure the Plastigage to find the bearing clearance. The main bearing clearance for new bearings must be 0.076 to 0.165 mm (.0030 to .0065 in). Maximum permissible clearance with used bearings is 0.25 mm (.010 in). 6. Put clean oil on the thrust bearing, and install a new thrust bearing for the rear main bearing. Install the thrust bearing with the identification