Rating:
Information injector assy Denso
Product
Injector
Vehicle engine
LAND CRUISER 1KD-FTV
Engine
1KD-FTV
Serial start-end
0810-
Info
This is not for Exchange Parts. The exchange Unit P/N : 095000-8230 (With a Gasket)
Injector Nozzle
TOYOTA
INJECTOR ASSY
AA
- 095000-814# CANNOT BE SUPPLIED. SPARE PART NUMBER IS
- 095000-823#(-814# AND A GASKET).
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09500-08140
INJECTOR ASSY
NO SUPPLY
23670-30340
TOYOTA
Include in ##:
Nozzle Specification:
Parts number
0950008140 TOYOTA
Nozzle
First opm
First op
Second om
Second op
Torquen
Torque
Prelift
Max lift
Engine
LAND CRUISER 1KD-FTV
Information
This not for Exchange Service.Exchanage Unit P/N:095000-8230 (With gasket). The replacement for 095000-509#.
Cross reference number
Part num
Firm num
Firm
Name
09500-08140
23670-3034
TOYOTA
INJECTOR ASSY
0950008140
23670-30340
TOYOTA
INJECTOR ASSY
Information:
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Loosen two hose clamps (1) and remove the hose from the tube assembly.2. Remove tube assembly (2) and the gasket.3. Disconnect hose assembly (3). 4. Loosen hose clamps (4) and remove the hose from the pipe. 5. Remove three bolts (6) and engine oil cooler assembly (5). Inspect all gaskets and make replacements if necessary. Install in reverse order.End By:a. install oil filter baseDisassemble And Assemble Engine Oil Cooler
Start By:a. remove engine oil cooler
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
Before assembly inspect gaskets and the O-ring seals for damage and make needed replacements. 1. Remove bonnet (1) and pipe (3) from core assembly (2). 2. Remove elbows (4) from the core assembly. Bolts (5) have twelve point heads. 3. Clean the tubes of the cooler core with a 3.96 mm (.156 in) diameter rod. Remove the o-ring seals and inspect for damage. Replace if necessary. Assemble in reverse order.End By:a. install engine oil cooler