Rating:
Information injector assy Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$214.68
08 Feb 2025
VN: Laminee
For Diesel Common Rail Injector 23670-39185 095000-7030 095000-7031 095000-7034 (23670 39185) For Denso car
Generic
Generic
$218.42
08 Feb 2025
VN: Laminee
Diesel Fuel Injectors 095000-703# Common Rail Injector 095000-7030 095000-7031 095000-7034 For Denso Injector 23670-39185
Generic
Generic
$219.03
08 Feb 2025
VN: Laminee
095000-703# 095000-7030 Common Rail Injection 095000-7031 Diesel Fuel Injector For Denso INJECTOR
Generic
Generic
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09500-07031
INJECTOR ASSY
0712-
23670-39186
TOYOTA
Include in ##:
09500-07031
as INJECTOR ASSY
Cross reference number
Part num
Firm num
Firm
Name
09500-07031
23670-3918
INJECTOR ASSY
Information:
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove cover (1) and the O-ring seal from the riming gear plate.
Use care when the trunnion is removed to prevent damage to the crankshaft front seal
2. Remove three bolts (2), trunnion (3) and the O-ring seal. 3. Remove the bolts that hold the timing gear cover in place. Carefully loosen the cover from the dowels and remove cover (4).4. Clean the old gasket from the contact surface of the timing gear cover and the timing gear plate.Install Timing Gear Cover
1. Install a new gasket (1) on the timing gear plate. Cut the gasket even with the bottom face on the cylinder block. 2. Install the timing gear cover (2). The bolts in locations (3) and (4) are tightened to a torque of 23 4 N m (17 3 lb ft). 3. Be sure the O-ring seal (6) is on position on trunnion. Install trunnion (5) and the bolts. Tighten the bolts to a torque of 135 15 N m (100 11 lb ft). 4. Install the O-ring seal and cover (7).End By:a. install crankshaft damper and pulleyb. install water pumpc. install air compressord. install oil pan