Rating:
Information injector assy Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
095000-0402 095000-0403 095000-0404 23910-1163 23910-1164 S2391-01164 Fuel Injector Fits for HINO P11C Engine (Pack of 6)
XYohykai ◆Part Name◆:Fuel Injector || ◆Part Number◆:095000-0402 095000-0403 095000-0404 23910-1163 23910-1164 S2391-01164 || ◆Application◆:Fits for HINO P11C Engine || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || ◆Worth Choice◆-This product has stable performance high reliability easy installation and fast response.
XYohykai ◆Part Name◆:Fuel Injector || ◆Part Number◆:095000-0402 095000-0403 095000-0404 23910-1163 23910-1164 S2391-01164 || ◆Application◆:Fits for HINO P11C Engine || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || ◆Worth Choice◆-This product has stable performance high reliability easy installation and fast response.
Fuel Injector 095000-0400 095000-0401 095000-0402 095000-0403 095000-0404 23910-1163 9709500-040 for Hino P11C
MGHOME Part Number: 095000-0400 095000-0401 095000-0402 095000-0403 095000-0404 23910-1163 9709500-040 || Applicable models: Fit for Hino P11C || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MGHOME Part Number: 095000-0400 095000-0401 095000-0402 095000-0403 095000-0404 23910-1163 9709500-040 || Applicable models: Fit for Hino P11C || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
1pcs Fuel injector 095000-0403 S2391-101164 0950000403 Compatible with Hino Engine P11C
GSHLGAO Part Number： 095000-0403 S2391-101164 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Part Name: Fuel injector || The P11C engine is a reliable and fuel-efficient high-performance diesel engine commonly used in heavy-duty trucks, buses, and construction equipment. With advanced technology and a durable design, it offers strong acceleration, low emissions, and minimal maintenance, making it a top choice for vehicle manufacturers. Trusted for its powerful performance and efficiency, the P11C engine ensures maximum uptime and cost savings for any application. || This product is specifically designed for seamless integration and optimal performance with the Hino Engine P11C, suitable for a variety of applications and industries. Its compatibility ensures easy installation and maintenance, reducing downtime and improving productivity. Users can expect enhanced functionality and superior performance, making it a valuable addition for any operation utilizing the Hino Engine P11C. || Included in the package is one piece of the fuel injector with the part number 095000-0403 and S2391-101164.
GSHLGAO Part Number： 095000-0403 S2391-101164 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Part Name: Fuel injector || The P11C engine is a reliable and fuel-efficient high-performance diesel engine commonly used in heavy-duty trucks, buses, and construction equipment. With advanced technology and a durable design, it offers strong acceleration, low emissions, and minimal maintenance, making it a top choice for vehicle manufacturers. Trusted for its powerful performance and efficiency, the P11C engine ensures maximum uptime and cost savings for any application. || This product is specifically designed for seamless integration and optimal performance with the Hino Engine P11C, suitable for a variety of applications and industries. Its compatibility ensures easy installation and maintenance, reducing downtime and improving productivity. Users can expect enhanced functionality and superior performance, making it a valuable addition for any operation utilizing the Hino Engine P11C. || Included in the package is one piece of the fuel injector with the part number 095000-0403 and S2391-101164.
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09500-00403
INJECTOR ASSY
0304--0605
23910-1164
HINO
Include in ##:
09500-00403
as INJECTOR ASSY
Cross reference number
Part num
Firm num
Firm
Name
09500-00403
23910-1164
INJECTOR ASSY
Information:
start by:a) remove turbocharger1. Make a mark on compressor housing (1), cartridge assembly (3) and turbine housing for correct installation. 2. Loosen clamp assemblies (2). Remove compressor housing (1) and cartridge assembly (3) from the turbine housing.3. Put the cartridge assembly in tooling (A).
When nut (5) is loosened, do not put a side force on the shaft.
4. Remove nut (5) and O-ring seal (6). 5. Put the cartridge assembly in a press. Remove the shaft assembly from compressor wheel (7) and cartridge (8). 6. Remove seal ring (10) and shroud (11) from shaft assembly (9).7. Use tooling (B) to remove snap ring (12).
Do not cause damage to insert (13) when it is removed.
8. Install screwdrivers as shown. Carefully lift insert (13) out of the cartridge assembly. 9. Remove sleeve (14) and O-ring seal (15) from the insert. 10. Remove two seal rings (16) from the sleeve.11. Remove deflector (17) from the cartridge assembly. 12. Remove ring (18). 13. Remove sleeve (19) from the cartridge assembly. Make an identification of the position of bearing (20) for assembly purposes.14. Remove bearing (20) from the cartridge assembly. 15. Remove ring (21). 16. Use tooling (C) to remove snap ring (23). Remove sleeve (22) and the lower snap ring. 17. Turn the cartridge housing over. Remove snap ring (26) with tooling (C).18. Remove bearing (25), sleeve (24) and the lower snap ring. Assemble Turbocharger (Schwitzer 4TF555)
Make sure all of the oil passages in the turbocharger cartridge housing are clean and free of dirt and foreign material. Put clean engine oil on all parts of the cartridge assembly. 1. Install snap ring (4) with tooling (A) in cartridge housing (1).2. Put sleeve (3) and bearing (2) in position. Install snap ring (5) with tooling (A).3. Turn the cartridge housing over. Install snap ring (8) with tooling (A). 4. Install sleeve (6) and snap ring (7).5. Put ring (10) in position in the cartridge housing. 6. Install bearing (9) with grooved side up. Make an alignment of the dowel in the housing with the hole on the right side of the notch.7. Put sleeve (12) in position. Install ring (11). 8. Put deflector (13) in position as shown. 9. Put two seal rings (15) in position on sleeve (14).10. Put O-ring seal (17) in position on insert (16). 11. Install sleeve (14) in insert (16).12. Install insert assembly (18) with the flange down in the cartridge housing. 13. Put O-ring seal (20) in position.14. Install snap ring (19) with tooling (B). 15. Put shaft assembly (22) in tooling (D). Put 6V2055 High Vacuum Grease in the groove for seal ring (23) at assembly to one half or more of the depth of the groove all the way around the groove. 16. Put seal ring (23) in position on the shaft assembly.17. Install shround (21) on the shaft assembly (22).18. Lightly oil the wheel face that will be under the nut. Put compressor wheel (24) in position.
Do not put a side force on the shaft
When nut (5) is loosened, do not put a side force on the shaft.
4. Remove nut (5) and O-ring seal (6). 5. Put the cartridge assembly in a press. Remove the shaft assembly from compressor wheel (7) and cartridge (8). 6. Remove seal ring (10) and shroud (11) from shaft assembly (9).7. Use tooling (B) to remove snap ring (12).
Do not cause damage to insert (13) when it is removed.
8. Install screwdrivers as shown. Carefully lift insert (13) out of the cartridge assembly. 9. Remove sleeve (14) and O-ring seal (15) from the insert. 10. Remove two seal rings (16) from the sleeve.11. Remove deflector (17) from the cartridge assembly. 12. Remove ring (18). 13. Remove sleeve (19) from the cartridge assembly. Make an identification of the position of bearing (20) for assembly purposes.14. Remove bearing (20) from the cartridge assembly. 15. Remove ring (21). 16. Use tooling (C) to remove snap ring (23). Remove sleeve (22) and the lower snap ring. 17. Turn the cartridge housing over. Remove snap ring (26) with tooling (C).18. Remove bearing (25), sleeve (24) and the lower snap ring. Assemble Turbocharger (Schwitzer 4TF555)
Make sure all of the oil passages in the turbocharger cartridge housing are clean and free of dirt and foreign material. Put clean engine oil on all parts of the cartridge assembly. 1. Install snap ring (4) with tooling (A) in cartridge housing (1).2. Put sleeve (3) and bearing (2) in position. Install snap ring (5) with tooling (A).3. Turn the cartridge housing over. Install snap ring (8) with tooling (A). 4. Install sleeve (6) and snap ring (7).5. Put ring (10) in position in the cartridge housing. 6. Install bearing (9) with grooved side up. Make an alignment of the dowel in the housing with the hole on the right side of the notch.7. Put sleeve (12) in position. Install ring (11). 8. Put deflector (13) in position as shown. 9. Put two seal rings (15) in position on sleeve (14).10. Put O-ring seal (17) in position on insert (16). 11. Install sleeve (14) in insert (16).12. Install insert assembly (18) with the flange down in the cartridge housing. 13. Put O-ring seal (20) in position.14. Install snap ring (19) with tooling (B). 15. Put shaft assembly (22) in tooling (D). Put 6V2055 High Vacuum Grease in the groove for seal ring (23) at assembly to one half or more of the depth of the groove all the way around the groove. 16. Put seal ring (23) in position on the shaft assembly.17. Install shround (21) on the shaft assembly (22).18. Lightly oil the wheel face that will be under the nut. Put compressor wheel (24) in position.
Do not put a side force on the shaft