Rating:
Information holder & nozzle se Denso
Product
Nozzle & Nozzle Holder
Vehicle engine
TRUCK D6A250
Engine
D6A250
Serial start-end
9508-
Info
Modification(Second opening pressure:221-231297-307, September 1997). Refer to service bulletin TW97-09.
Injector Nozzle
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
Nozzle Specification:
Parts number
0935006150 VOLVO
Nozzle
0934006480
First opm
23.52-24.50
First op
240-250
Second om
21.65-22.63
Second op
221-231
Torquen
58.8-78.4
Torque
6.0-8.0
Prelift
0.108-0.128
Max lift
0.300-0.350
Engine
TRUCK D6A250
Information
Modification(Second opening pressure:221-231 -> 297-307, September 1997). Refer to service bulletin THZ97-01.
Include as Nozzle:
Cross reference number
Part num
Firm num
Firm
Name
09350-06150
HOLDER & NOZZLE SE
Information:
Table 1
Sales Model Adaptable Serial Numbers Effective Serial Numbers
834K S/N:TWY1-704 S/N:TWY705-UP
988K S/N:TWX1-865 S/N:TWX866-UP Required parts
Table 2
Required Parts List
Item Qty Part Number Part Description
1 1 481-4103 Hose
2 2 2J-6540 Hose Clamp
3 1 481-4102 Plate As
4 1 446-0473 Adapter As
5 6 9X-2045 Screw
6 6 9X-8256 Washer
7 13 8T-4136 Bolt
8 13 8T-4121 Hard Washer
9 1 481-4106 Angle As
10 1 481-4104 Plate As
11 460 mm (18.1 inch) 126-8472 Seal
12 1 205-3743 Hinge As
13 1 481-4108 Plate As
14 1 398-2993 Tank Filler Cap
15 1 387-5472 Lanyard
16 1 481-4105 Plate
17 1 331-4030 Latch As
18 3 7Y-7389 Screw
19 1 487-0512 Guardrail As Rework and install procedure for DEF fill cover
Illustration 1 g06084375
(A) 364-7654 Guardrail As
(B) 8T-4139 Bolt
(C) 5P-1076 Hard Washer
(D) 8T-4183 Bolt
(E) 7X-3392 Hard WasherUse the following rework procedure to remove Guardrail assembly
Removing guardrail assembly (A) by removing two 8T-4139 Bolt (B), two 5P-1076 Hard Washer (C), four 8T-4183 Bolt (D), and four 7X-3392 Hard Washer (E). Save the parts.
Illustration 2 g06084382
(F) 206-5017 Spacer
(G) 8T-4226 Plated Washer
(H) 8T-4136 Bolt
(J) 430-4507 Flap
(K) 9X-2045 Screw
(L) 9X-6381 Washer
(M) 398-2993 Tank Filler Cap
(N) 446-0473 Adapter As
(P) 430-4518 Tank Mounting Gp
Remove 430-4518 Tank Mounting Gp (P) by removing two 206-5017 Spacer (F), two 8T-4226 Plated Washer (G), two 8T-4136 Bolt (H), and 430-4507 Flap (J). Discard the parts.
Remove six 9X-2045 Screw (K), six 9X-6381 Washer (L), 398-2993 Tank Filler Cap (M), and 446-0473 Adapter As (N). Discard the parts.
Illustration 3 g06084449
(H) 8T-4136 Bolt
(R) 8T-4121 Hard Washer
(S) 430-4504 Plate
(T) 430-4510 Plate As
Remove two 8T-4136 Bolt (H), two 8T-4121 Hard Washer (R), and 430-4504 Plate (S) and discard the parts.
Remove two 8T-4136 Bolt (H), two 8T-4121 Hard Washer (R), and 430-4510 Plate As (T). Discard the parts.
Illustration 4 g06084463
(H) 8T-4136 Bolt
(R) 8T-4121 Hard Washer
(U) 365-0333 Hose
(V) 430-4505 Plate As
(W) 2J-6540 Hose Clamp
Remove Four 8T-4136 Bolt (H), four 8T-4121 Hard Washer (R), and 430-4505 Plate As (V). Discard the parts.
Remove 2J-6540 Hose Clamp (W), and 365-0333 Hose (U). Discard the parts.