Rating:
Information holder & nozzle se Denso
Product
Nozzle & Nozzle Holder
Vehicle engine
LAND CRUISER 1HD-FT
Engine
1HD-FT
Serial start-end
9412-
Info
Modification(Second opening pressure:235-245 -> 311-321, September 1997). Refer to service bulletin TW97-09.
Injector Nozzle
TOYOTA
HOLDER & NOZZLE SE
AA
- *1:THE DEPTH OF THE SPOT FACING OF THE CHIP HAS BEEN
- CHANGED FROM 2MM TO 2.5MM.NEW CHIP(AFTER SEPTEMBER1997)
- CAN BE USED, IF 1-6 AND 1-11 ARE CHANGED TOGETHER.
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09350-06010
HOLDER & NOZZLE SE
Include in ##:
Nozzle Specification:
Parts number
0935006010 TOYOTA
Nozzle
0934006390
First opm
17.64-18.62
First op
180-190
Second om
23.03-24.01
Second op
235-245
Torquen
24.5-34.3
Torque
2.5-3.5
Prelift
0.085-0.105
Max lift
0.230-0.280
Engine
LAND CRUISER 1HD-FT
Information
Modification(Second opening pressure:235-245 -> 311-321, September 1997). Refer to service bulletin THZ97-01.
Cross reference number
Part num
Firm num
Firm
Name
09350-06010
TOYOTA
HOLDER & NOZZLE SE
Information:
Introduction
Do not perform any procedure that is outlined in the Special Instruction until the entire instruction has been read and understood.Check Valve Torque
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
The check valves that are located within the fuel pressure regulator group are sensitive to assembly torque. In order to eliminate the risk of valve distortion, torque the check valves to 28 3 N m (21 2 lb ft). Refer to Table 1 for the check valve part numbers that required the torque that is listed above.
Table 1
Part Number Description
327-0376 Check Valve Gp
327-4448 Check Valve Gp
281-2725 Check Valve Gp
282-1915 Check Valve Gp
228-7381 Check Valve Gp
327-8044 Check Valve Gp
Do not perform any procedure that is outlined in the Special Instruction until the entire instruction has been read and understood.Check Valve Torque
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
The check valves that are located within the fuel pressure regulator group are sensitive to assembly torque. In order to eliminate the risk of valve distortion, torque the check valves to 28 3 N m (21 2 lb ft). Refer to Table 1 for the check valve part numbers that required the torque that is listed above.
Table 1
Part Number Description
327-0376 Check Valve Gp
327-4448 Check Valve Gp
281-2725 Check Valve Gp
282-1915 Check Valve Gp
228-7381 Check Valve Gp
327-8044 Check Valve Gp