Rating:
Information holder & nozzle se Denso
Product
Nozzle & Nozzle Holder
Vehicle engine
TRUCK 15B-T
Engine
15B-T
Serial start-end
9308-
Info
Injector Nozzle
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09350-05670
HOLDER & NOZZLE SE
Include in ##:
09350-05670
as HOLDER & NOZZLE SE
Nozzle Specification:
Parts number
0935005670 TOYOTA
Nozzle
0934006220
First opm
19.60-20.58
First op
200-210
Second om
-
Second op
-
Torquen
24.5-34.3
Torque
2.5-3.5
Prelift
-
Max lift
Engine
TRUCK 15B-T
Information
Include as Nozzle:
Cross reference number
Part num
Firm num
Firm
Name
09350-05670
HOLDER & NOZZLE SE
Information:
Introduction
The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Certain Cat® Reman fuel injectors were packaged with an incorrect trim file on the enclosed CD. The fuel injectors will have a package date of 25August 2014 to 15September 2014.Affected part numbers are listed below.
Table 1
Reman Part Number
10R-1273
10R-2772
10R-2977
10R-3261
10R-3265
10R-7230
10R-7231
20R-2284
20R-2285 Solution
The new trim files were uploaded to SISWEB on 17September 2014. Download the new flash file using the serial number on the injector. Note: Refer to Service Magazine, SEPD1044, "Using Injector Trim Files "
The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Certain Cat® Reman fuel injectors were packaged with an incorrect trim file on the enclosed CD. The fuel injectors will have a package date of 25August 2014 to 15September 2014.Affected part numbers are listed below.
Table 1
Reman Part Number
10R-1273
10R-2772
10R-2977
10R-3261
10R-3265
10R-7230
10R-7231
20R-2284
20R-2285 Solution
The new trim files were uploaded to SISWEB on 17September 2014. Download the new flash file using the serial number on the injector. Note: Refer to Service Magazine, SEPD1044, "Using Injector Trim Files "