Rating:
Information holder & nozzle se Denso
Product
Nozzle & Nozzle Holder
Vehicle engine
INDUSTRIAL SA6D10
Engine
SA6D10
Serial start-end
9209-
Info
Injector Nozzle
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09350-05370
HOLDER & NOZZLE SE
Include in ##:
09350-05370
as HOLDER & NOZZLE SE
Nozzle Specification:
Parts number
0935005370 KOMATSU
Nozzle
0934006130
First opm
26.46-27.44
First op
270-280
Second om
-
Second op
-
Torquen
39.2-49.0
Torque
4.0-5.0
Prelift
-
Max lift
Engine
INDUSTRIAL SA6D10
Information
Include as Nozzle:
Cross reference number
Part num
Firm num
Firm
Name
09350-05370
HOLDER & NOZZLE SE
Information:
Table 1
Revision Table
Revision Summary of Changes
3 Added serial numbers. Improvement Procedure
Clean oil rail after pump failure.Reference: Refer to Special Instruction, REHS3819 for the procedure to clean the oil rail after engine failure to avoid debris in the oil system.
Use clean oil and clean filters.The life of the injector depends on the oil quality. It can be increased if good cleaning practices are performed before installing the injectors.Reference: Refer to Operation and Maintenance Manual, SEBU6250 and Operation and Maintenance Manual, SEBU6251 for direction on oil sampling intervals and optimizing engine oil life.
Illustration 1 g06207717
(1) Actuator
(2) Pump Group
(3) Valve Seat Damage Due to Debris in the Oil SystemInjector Failure Due To Damage From Debris In The Oil May Not Be A Warrantable Failure
Illustration 2 g06244961