Rating:
Information holder & nozzle se Denso
Product
Nozzle & Nozzle Holder
Vehicle engine
TRUCK F17E
Engine
F17E
Serial start-end
9203-
Info
Injector Nozzle
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09350-05200
HOLDER & NOZZLE SE
-0605
000
[01]
09350-05200
HOLDER & NOZZLE SE
0605-
Include in ##:
09350-05200
as HOLDER & NOZZLE SE
09350-05200 HOLDER & NOZZLE SE
Nozzle Specification:
Parts number
0935005200 HINO
Nozzle
0934002670
First opm
15.19-15.97
First op
155-163
Second om
27.53-28.32
Second op
281-289
Torquen
63.7-73.5
Torque
6.5-7.5
Prelift
0.077-0.113
Max lift
Engine
TRUCK F17E
Information
Include as Nozzle:
Cross reference number
Part num
Firm num
Firm
Name
09350-05200
HOLDER & NOZZLE SE
Information:
DO NOT START THE ENGINE WITHOUT PRIMING THE FUEL SYSTEM
Illustration 1 g03735591
Damaged plunger spring due to improper fuel system primingFuel System Priming Procedure:
Disconnect the injector harness at the valve cover.
Use the hand primer to fill the fuel system. Pump until the hand primer becomes too hard to depress by hand.
Crank the engine 3 times for 15 seconds each. Reapply the hand primer after each cranking cycle.
Once the hand primer remains hard to depress after the 15 second crank, reconnect the injector harness and start the engine.
Clear any related fault codes (ET) that were logged while cranking the engine with the injector harness disconnected.
Illustration 2 g03736011