Rating:
Information holder & nozzle se Denso
Product
Nozzle & Nozzle Holder
Vehicle engine
TERCEL 1N-T
Engine
1N-T
Serial start-end
8805-
Info
Injector Nozzle
Components :
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09350-04010
HOLDER & NOZZLE SE
Include in ##:
Nozzle Specification:
Parts number
0935004010 TOYOTA
Nozzle
0934005410
First opm
13.52-15.28
First op
138-156
Second om
-
Second op
-
Torquen
34.3-39.2
Torque
3.5-4.0
Prelift
-
Max lift
Engine
TERCEL 1N-T
Information
Cross reference number
Part num
Firm num
Firm
Name
09350-04010
HOLDER & NOZZLE SE
Information:
Do not use more than 55 kPa (8 psi) of air pressure in the fuel tank or damage to the tank may result.
Check for leaks at the connections between the fuel tank and the transfer pump. If leaks are found, tighten the connections or replace the lines. If there are no visual leaks, remove the fuel supply line from the tank and connect to an outside fuel supply. If this corrects the problem, the suction (standpipe) inside of the fuel tank has a leak.4. Low quality fuel: Remove a small amount of fuel from the tank and check for water in the fuel. If there is water in the fuel, remove fuel from the tank until the tank is free of water. Change the fuel filter and fill the fuel tank with a good quality fuel. The fuel