Rating:
Information head sub-assy, dis Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$158.65
06 Aug 2024
CN: Tenlioshun
Tenlioshun New Diesel Fuel Pump Head Rotor VE Pump 096400-1430 096000-8104 Compatible with Nissan
Tenlioshun Part Name: Fuel Pump Head || Part number: 096400-1430 096000-8104 || Compatible with Nissan || Package included: 1 Pieces Fuel Pump Head || Note: Avoid unnecessary returns. Before purchase, please carefully check whether the product model you want to buy matches us. If you don't know, please contact us.
Tenlioshun Part Name: Fuel Pump Head || Part number: 096400-1430 096000-8104 || Compatible with Nissan || Package included: 1 Pieces Fuel Pump Head || Note: Avoid unnecessary returns. Before purchase, please carefully check whether the product model you want to buy matches us. If you don't know, please contact us.
$167.00
28 Aug 2023
CN: Huaxiaoshuai
dertgmlm New Diesel Fuel Pump Head Rotor VE Pump 096400-1430 096000-8104 Fits for Nissan
dertgmlm Part Name: Fuel Pump Head || Part number: 096400-1430 096000-8104 || Fits for Nissan || Package included: 1 Pieces Fuel Pump Head || Note: Avoid unnecessary returns. Before purchase, please carefully check whether the product model you want to buy matches us. If you don't know, please contact us.
dertgmlm Part Name: Fuel Pump Head || Part number: 096400-1430 096000-8104 || Fits for Nissan || Package included: 1 Pieces Fuel Pump Head || Note: Avoid unnecessary returns. Before purchase, please carefully check whether the product model you want to buy matches us. If you don't know, please contact us.
Include in ##:
Cross reference number
Part num
Firm num
Firm
Name
09640-01430
MD627098
HEAD SUB-ASSY, DIS
0964001430
MD627098
MITSUBISHI
HEAD SUB-ASSY, DIS
Information:
1. Put cylinder head assembly (1) in position on tool group (A). 2. Put compression on valve spring (2) with tool (C). 3. Remove spring locks (3). 4. Remove tool (C). Remove valve spring cap (2) and valve springs (4). 5. Remove washer (5) and O-ring seal (8) from valve (7).6. Remove seal (6). Remove valve (7). 7. Check the valve spring tension with tool (B). The outer spring force must be 180 9 N (40 2 lb.). The length of the spring under test force must be 27.4 mm (1.08 in.). The free length after test must be 45.2 mm (1.78 in.). The inner spring force must be 68.5 9 N (15.4 2 lb.). The length of the spring under test force must be 23.88 mm (.940 in.). The length after test must be 39.6 mm (1.56 in.).8. Do Steps 1 through 8 again for the remainder of the valves. If the cylinder head is equipped with removable valve guides, refer to module SENB8082-06, System Operating Testing And Adjusting Specifications, 4.236 And 4.2482 Diesel Engines For Lift Trucks.Install Valves
1. Put clean engine oil on the valve stems.2. Install valve (3), washer (2) and seal (1).
The closed coil of the spring must be toward the cylinder head.
3. Install springs (5) and valve spring cap (4). 4. Use tool (A), and put springs under compression, and install O-ring seal on the valve. Exhaust valves have an extra O-ring seal on them.
Locks (6) can be thrown from the valve when tool (A) is released if they are not in their correct position on the valve stem.
5. Use tool (B), and install locks (6) that hold the springs in place.6. Remove tool (A), and hit the top of the valve with a plastic hammer to be sure the locks are in their correct position on the valve.7. Do Steps 1 through 6 again for the remainder of the valves.End By:a. install cylinder head assemblyb. install water temperature regulatorc. install fuel filterd. install fuel injection nozzle assembliese. install inlet manifold
1. Put clean engine oil on the valve stems.2. Install valve (3), washer (2) and seal (1).
The closed coil of the spring must be toward the cylinder head.
3. Install springs (5) and valve spring cap (4). 4. Use tool (A), and put springs under compression, and install O-ring seal on the valve. Exhaust valves have an extra O-ring seal on them.
Locks (6) can be thrown from the valve when tool (A) is released if they are not in their correct position on the valve stem.
5. Use tool (B), and install locks (6) that hold the springs in place.6. Remove tool (A), and hit the top of the valve with a plastic hammer to be sure the locks are in their correct position on the valve.7. Do Steps 1 through 6 again for the remainder of the valves.End By:a. install cylinder head assemblyb. install water temperature regulatorc. install fuel filterd. install fuel injection nozzle assembliese. install inlet manifold