Rating:
Information element kit, suppl Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Diesel Fuel Injection Pump 294090-0360 294090-0650 294090-0890 294090-0880 HP3 HP4 Pump Plunger - (Color: HP4, Style: A)
Generic Color: HP4
Generic Color: HP4
$143.10
19 Sep 2024
0.1102[0.05] pounds
CN: ChuChunWaiCe10
BDALEAOES HP3 Pump Plunger Assembly 294090-0650 Supply Pump Element Kit, ChuChunWaiCe10
BDALEAOES * Good-quality materials: Our pump plunger is made of good-quality materials and precision machining, which can make the product durable and stable, operate smoothly and reduce noise and vibration. || * Precise technology: After fine processing and strict quality control, each pump plunger has high precision and can run better. || * Wide compatibility: Our product design is compatible with all kinds of car brands and models, so you can easily install and use it. || * Efficient and energy-saving: the plunger of automobile pump is designed with advanced technology, which provides efficient lubrication and energy-saving functions and prolongs the life of engine. || * Cold and hot adaptability: Our pump plunger performs well in both high and low temperature environments, which can make the engine work normally.
BDALEAOES * Good-quality materials: Our pump plunger is made of good-quality materials and precision machining, which can make the product durable and stable, operate smoothly and reduce noise and vibration. || * Precise technology: After fine processing and strict quality control, each pump plunger has high precision and can run better. || * Wide compatibility: Our product design is compatible with all kinds of car brands and models, so you can easily install and use it. || * Efficient and energy-saving: the plunger of automobile pump is designed with advanced technology, which provides efficient lubrication and energy-saving functions and prolongs the life of engine. || * Cold and hot adaptability: Our pump plunger performs well in both high and low temperature environments, which can make the engine work normally.
Include in ##:
Number on scheme 015
29400-00039
as ELEMENT KIT, SUPPL
Cross reference number
Part num
Firm num
Firm
Name
29409-00650
ELEMENT KIT, SUPPL
Information:
1. Install the two fuel lines in transfer pump.2. Put the fuel transfer pump in position in the accessory drive housing, and install the two bolts.3. Connect the two fuel lines to priming pump.4. Connect the fuel line to transfer pump.Disassemble Fuel Transfer Pump
start by: a) remove fuel transfer pump 1. Remove the nut (2), gear (3), and key.2. Remove the cage (1). Remove the O-ring seals from the cage.3. Use tool setup (A) to remove the bearing and seals from cage (1).4. Remove the cover (4).
Be careful during disassembly and assembly of pump to prevent damage to the contacting surfaces of the cover (4) and the pump body.
5. Remove the bolt (5), spring, and ball for the check valve for the priming pump. 6. Remove the gear (7), and gear and shaft assembly (6) from pump body. 7. Use tool setup (A) to remove the bearing from the pump body.Assemble Fuel Transfer Pump
1. Clean all parts thoroughly before assembling the pump. 2. Use tool setup (A) to install the bearing in the pump body.3. Put the gear, and gear and shaft assembly in position in pump body.4. Put a thin amount of 8S6747 Liquid Gasket Material on the face of body assembly that is against the cover.
Do not let the liquid gasket material get into the pump.
5. Put the cover into position on pump body and install the bolts. The gear and shaft assembly must turn freely after the bolts in cover have been tightened.6. Install the check valve ball, spring, and bolt for the priming pump in the cover. 7. Use tool setup (B) to install the seals in cage. Install the two seals with the lips of seals toward each other.8. Use tool setup (A) to install the bearing in cage assembly. Install the O-ring seals on cage. 9. Put clean oil on O-ring seals and lips of seals. 10. Put the cage assembly in position, and install the woodruff key, gear, and nut. Tighten nut to 22 5 lb.ft. (3.0 0.7 mkg).end by: a) install fuel transfer pump
start by: a) remove fuel transfer pump 1. Remove the nut (2), gear (3), and key.2. Remove the cage (1). Remove the O-ring seals from the cage.3. Use tool setup (A) to remove the bearing and seals from cage (1).4. Remove the cover (4).
Be careful during disassembly and assembly of pump to prevent damage to the contacting surfaces of the cover (4) and the pump body.
5. Remove the bolt (5), spring, and ball for the check valve for the priming pump. 6. Remove the gear (7), and gear and shaft assembly (6) from pump body. 7. Use tool setup (A) to remove the bearing from the pump body.Assemble Fuel Transfer Pump
1. Clean all parts thoroughly before assembling the pump. 2. Use tool setup (A) to install the bearing in the pump body.3. Put the gear, and gear and shaft assembly in position in pump body.4. Put a thin amount of 8S6747 Liquid Gasket Material on the face of body assembly that is against the cover.
Do not let the liquid gasket material get into the pump.
5. Put the cover into position on pump body and install the bolts. The gear and shaft assembly must turn freely after the bolts in cover have been tightened.6. Install the check valve ball, spring, and bolt for the priming pump in the cover. 7. Use tool setup (B) to install the seals in cage. Install the two seals with the lips of seals toward each other.8. Use tool setup (A) to install the bearing in cage assembly. Install the O-ring seals on cage. 9. Put clean oil on O-ring seals and lips of seals. 10. Put the cage assembly in position, and install the woodruff key, gear, and nut. Tighten nut to 22 5 lb.ft. (3.0 0.7 mkg).end by: a) install fuel transfer pump