Rating:
Information element kit, suppl Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
IMIFAFTAbT 294090-0230 2940900230 Common Rail High Pressure Pump Plunger Fits for Denso HP4 series Fuel injection pump
IMIFAFTAbT Product Name: 294090-0230 2940900230 Common Rail High Pressure Pump Plunger || Part number: 294090-0230 2940900230 || Fits for Denso HP4 series Fuel injection pump || 1 PCS Common Rail High Pressure Pump Plunger || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate
IMIFAFTAbT Product Name: 294090-0230 2940900230 Common Rail High Pressure Pump Plunger || Part number: 294090-0230 2940900230 || Fits for Denso HP4 series Fuel injection pump || 1 PCS Common Rail High Pressure Pump Plunger || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate
Include in ##:
Number on scheme 016
29405-00027
as ELEMENT KIT, SUPPL
Cross reference number
Part num
Firm num
Firm
Name
29409-00230
ELEMENT KIT, SUPPL
Information:
Use all cleaning solutions with care.
1. Loosen the bolt (1) on the filter cover and lower the filter case (3).2. Remove the element (2). Wash the cover and element in clean, nonflammable solvent.3. Reinstall the element into the case.4. Install the element and case onto the cover.5. Tighten the bolt.Changing Secondary Filter
1. Unscrew filter element. Throw away the used element. 2. Make certain all of the used element seal is cleaned from the filter base. 3. Coat the seal of the new element with clean diesel fuel.
Do not fill fuel filters with fuel before installing them. Contaminated fuel will cause accelerated wear to fuel system parts.
4. Install the filter by hand. When the seal contacts the base, tighten 3/4 turn more. There are rotation marks 90° apart on the filter. Use these as a guide for proper tightening.5. Start the engine and check for leaks. If the engine will not start, prime the fuel system.