Rating:
Information element sub-assy, Denso
Include in ##:
Cross reference number
Part num
Firm num
Firm
Name
09015-00750
ELEMENT SUB-ASSY,
Information:
Specifications
For the oil pump, which is enclosed in the gear case, see Group 1 ENGINE PROPERSpecial Tools
OIL FILTER AND OIL PRESSURE SWITCH
Construction
Oil Filter and Pressure Switch(1) Oil filter(2) Oil pressure switchRemoval and Installation
(1) Coat the O-ring with engine oil. Take care not to twist the O-rings.(2) Coat the threads with sealant (HERMESEAL HI or THREEBOND 1314).(3) Tightening torque: 1.1 - 1.3 kgf m [10.8 - 12.7 N m] (Do not use any wrench.) CAUTION* After installation, check for oil leak while the engine is running.
Installing Oil Filter
Installing Pressure SwitchInspection
Inspect the following:(1) Oil leakPressure switch ON pressure:0.5 0.1 kgf/cm2 [0.05 0.01 MPa] CAUTION* Check the oil filter for dirtiness. If necessary, clean the engine interior with flushing oil.
Inspecting Oil Filter and Switch
For the oil pump, which is enclosed in the gear case, see Group 1 ENGINE PROPERSpecial Tools
OIL FILTER AND OIL PRESSURE SWITCH
Construction
Oil Filter and Pressure Switch(1) Oil filter(2) Oil pressure switchRemoval and Installation
(1) Coat the O-ring with engine oil. Take care not to twist the O-rings.(2) Coat the threads with sealant (HERMESEAL HI or THREEBOND 1314).(3) Tightening torque: 1.1 - 1.3 kgf m [10.8 - 12.7 N m] (Do not use any wrench.) CAUTION* After installation, check for oil leak while the engine is running.
Installing Oil Filter
Installing Pressure SwitchInspection
Inspect the following:(1) Oil leakPressure switch ON pressure:0.5 0.1 kgf/cm2 [0.05 0.01 MPa] CAUTION* Check the oil filter for dirtiness. If necessary, clean the engine interior with flushing oil.
Inspecting Oil Filter and Switch