Rating:
Information bolt Denso
Include in ##:
Cross reference number
Part num
Firm num
Firm
Name
94904-44010
BOLT
9490444010
ME728336
MITSUBISHI
BOLT
Information:
Problem
There is a lack of lubrication to the A-pin.Solution
Increase the amount of grease to the A-pin by decreasing the interval of the lube cycle from 15 minutes (factory setting) to 8 minutes. Decrease the cycle time to 8 minutes by using the VIMS keypad.Adjust the injectors at all other pin joints in order to reduce the grease flow. This will prevent having excess grease at the other pin joints.See the table for each injector setting.
Table 1
Pin Joint Location # Injectors Number of Turns Out Lubricant Volume (in3) Lubricant Volume (mL) mL/Hour
0 0.014 0.2294 0.0000
Hitches (2)
Trunnions (4)
Fan Drive/Belt (2) 8 1 0.022 0.3605 21.6309
F (2)
G (2) 4 2 0.030 0.4916 14.7484
E (2)
Steering Cylinders (4) 6 3 0.038 0.6227 28.0219
B (4)
C (2)
D (2)
K (2)
Y (2) 12 4 0.046 0.7538 67.8424
5 0.054 0.8849 0.0000
6 0.062 1.0160 0.0000
7 0.070 1.1471 0.0000
A (4) 4 8 0.078 1.2782 38.3457
Total mL/Hour 170.5893
There is a lack of lubrication to the A-pin.Solution
Increase the amount of grease to the A-pin by decreasing the interval of the lube cycle from 15 minutes (factory setting) to 8 minutes. Decrease the cycle time to 8 minutes by using the VIMS keypad.Adjust the injectors at all other pin joints in order to reduce the grease flow. This will prevent having excess grease at the other pin joints.See the table for each injector setting.
Table 1
Pin Joint Location # Injectors Number of Turns Out Lubricant Volume (in3) Lubricant Volume (mL) mL/Hour
0 0.014 0.2294 0.0000
Hitches (2)
Trunnions (4)
Fan Drive/Belt (2) 8 1 0.022 0.3605 21.6309
F (2)
G (2) 4 2 0.030 0.4916 14.7484
E (2)
Steering Cylinders (4) 6 3 0.038 0.6227 28.0219
B (4)
C (2)
D (2)
K (2)
Y (2) 12 4 0.046 0.7538 67.8424
5 0.054 0.8849 0.0000
6 0.062 1.0160 0.0000
7 0.070 1.1471 0.0000
A (4) 4 8 0.078 1.2782 38.3457
Total mL/Hour 170.5893