09010-07580 BODY ASSY, INJECTI Denso Cross


Rating:
9
Buy BODY ASSY, INJECTI 09010-07580 genuine, new aftermarket engine parts with delivery

Information body assy, injecti Denso

KIT List:

Part name
Kit1
Kit2
Body assy, injecti
Body assy, injecti
Body assy, injecti
Body assy, injecti
Body assy, injecti
Body assy, injecti
Body assy, injecti
Body assy, injecti

Scheme #.#:

Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09010-07580
BODY ASSY, INJECTI
A6
001
[01]
HOUSING KIT, INJEC
001-001
[03]
BOLT, STUD
M6,L26
003
[06]
HOLDER, DELIVERY V
004
[06]
STOPPER, DELIVERY
005
[06]
SPRING, DELIVERY V
006
[06]
GASKET, DELIVERY V
ID9.6D13
007
[06]
VALVE SUB-ASSY, IN
MK:G
008
[06]
ELEMENT SUB-ASSY,
MK:3950
009
[06]
PINION, PLUNGER CO
010
[06]
SCREW, PLUNGER CON
011
[06]
SLEEVE, PLUNGER CO
012
[06]
SEAT, SPRING, UPR
-9301
012
[06]
SEAT, SPRING, UPR
9301-
013
[06]
SPRING, PUMP PLUNG
014
[06]
SEAT, SPRING, LWR
015
[06]
TAPPET SUB-ASSY,IN
016
[06]
PLUG, INJECTION PU
017
[01]
CAMSHAFT, INJECTIO
018
[01]
RING, CAMSHAFT ADJ
019
[3C]
PLATE, CAMSHAFT SH
T0.1
019
[3C]
PLATE, CAMSHAFT SH
T0.12
019
[3C]
PLATE, CAMSHAFT SH
T0.14
019
[3C]
PLATE, CAMSHAFT SH
T0.16
019
[3C]
PLATE, CAMSHAFT SH
T0.18
019
[3C]
PLATE, CAMSHAFT SH
T0.5
019
[3C]
PLATE, CAMSHAFT SH
T0.3
019
[3C]
PLATE, CAMSHAFT SH
T1.0
019
[3C]
PLATE, CAMSHAFT SH
T1.5
019
[3C]
PLATE, CAMSHAFT SH
T2.0 9502-
019
[3C]
PLATE, CAMSHAFT SH
T0.03 9502-
020
[01]
COVER, BEARING
021
[01]
O-RING
ID52.0
022
[01]
RACK, CONTROL
023
[01]
SCREW, RACK GUIDE
-9301
023
[01]
SCREW, RACK GUIDE
9301-
024
[03]
PLATE SET, VALVE H
025
[01]
SEAL, OIL
026
[01]
COVER SUB-ASSY, IN
026-001
[01]
PROCESSING DRAWING
026-002
[01]
GASKET, INJECTION
026-003
[02]
PACKING, AIR BLEED
026-004
[02]
SCREW
027
[6C]
PLATE, TAPPET ADJU
T0.6
027
[6C]
PLATE, TAPPET ADJU
T0.7
027
[6C]
PLATE, TAPPET ADJU
T0.8
027
[6C]
PLATE, TAPPET ADJU
T0.9
027
[6C]
PLATE, TAPPET ADJU
T1.0
027
[6C]
PLATE, TAPPET ADJU
T1.1
027
[6C]
PLATE, TAPPET ADJU
T1.2
027
[6C]
PLATE, TAPPET ADJU
T1.3
027
[6C]
PLATE, TAPPET ADJU
T1.4
027
[6C]
PLATE, TAPPET ADJU
T0.1
027
[6C]
PLATE, TAPPET ADJU
T0.2
027
[6C]
PLATE, TAPPET ADJU
T0.3
027
[6C]
PLATE, TAPPET ADJU
T0.4
027
[6C]
PLATE, TAPPET ADJU
T0.5
027
[6C]
PLATE, TAPPET ADJU
T0.15
028
[03]
NUT, HEXAGON
M6
029
[03]
WASHER, SPRING
FOR M6
030
[04]
BOLT, W/WASHER
M6,L14
031
[01]
BEARING, ROLLER
032
[01]
O-RING
ID32.0
033
[01]
VALVE ASSY, OVERFL
1.5-1.7K
039
[01]
BEARING, CENTER
040
[02]
SCREW, CROSSRECESS
M5,L35 -9111
040
[02]
SCREW
9111-
041
[02]
WASHER, COPPER PLA
T1
042
[02]
SCREW, HOLLOW
043
[06]
WASHER, FUEL PIPE
045
[06]
O-RING
ID17.0
046
[01]
RING, CAMSHAFT ADJ
047
[3C]
PLATE, CAMSHAFT SH
T0.1
047
[3C]
PLATE, CAMSHAFT SH
T0.15
047
[3C]
PLATE, CAMSHAFT SH
T0.3
047
[3C]
PLATE, CAMSHAFT SH
T0.5
047
[3C]
PLATE, CAMSHAFT SH
T1.0 9502-
047
[3C]
PLATE, CAMSHAFT SH
T1.5 9502-
047
[3C]
PLATE, CAMSHAFT SH
T0.12
047
[3C]
PLATE, CAMSHAFT SH
T0.14
047
[3C]
PLATE, CAMSHAFT SH
T0.18
047
[3C]
PLATE, CAMSHAFT SH
T0.03 9502-
048
[01]
BEARING, ROLLER

Cross reference number



Part num
Firm num
Firm
Name
09010-07580 
 
BODY ASSY, INJECTI




Information:

1. Remove fuel line (1) from the fuel transfer pump.2. Put caps in the fuel line openings to prevent fuel system contamination.3. Remove bolts (2), and remove fuel transfer pump (3). Check the condition of the O-ring seal on the fuel transfer pump. If necessary, make a replacement.Install Fuel Transfer Pump
1. Be sure O-ring seal (1) is in position on the fuel transfer pump. Put clean engine oil on the O-ring seal.2. Put fuel transfer pump (2) in position, and install the bolts that hold it in place.3. Remove the caps from the fuel line openings, and install fuel line (3).4. Prime the fuel system. See the Maintenance Guide for this procedure.Disassemble Fuel Transfer Pump
START BY:a. remove fuel transfer pump 1. Remove seal (1) from the fuel transfer pump.
Cover (2) is under spring tension. Remove the bolts that hold cover (2) slowly to prevent injury.
2. Remove bolts (3) and cover (2) from the housing. 3. Remove seals (4) and valve (5) from cover (2). 4. Remove spring (6) from the piston.
Mark the orientation of valve (8) as to its location in the housing.
5. Remove washer (7), valve (8) and the seal from the housing. 6. Remove piston (9) and sleeve (10) from the housing. 7. Remove seal (11) from sleeve (12). 8. Remove guide and tappet assembly (13) from the housing. 9. Remove seal (14) from guide (15).
If tappet (17) or the guide are damaged or worn, they must be replaced as a unit.
10. Remove ring (16) from tappet (17) and the tappet from guide (15). 11. Remove the bolts and cover (18) from the housing. 12. Remove seal (19) from cover (18). 13. Remove valve (20) from the housing if necessary.Assemble Fuel Transfer Pump
1. Install valve (2) in housing (1) as shown. 2. Put clean fuel on seal (4), and install it on cover (3).3. Install cover (3) on the housing.
The tappet and guide must be serviced as a unit.
4. Install tappet (6) in guide (5). Install ring (7) on tappet (6) to hold the tappet in the guide. 5. Put clean fuel on seal (8), and install it on guide and tappet assembly (9).6. Install guide and tappet assembly (9) in the housing as shown. 7. Put clean fuel on seal (10), and install it on sleeve (11).8. Install sleeve (11) in the housing. 9. Install piston (12) in the housing. 10. Install seal valve (14) and washer (13) in the housing as shown. Be sure valve (14) is the correct position in the housing. 11. Install spring (15) in the piston. 12. Install valve (18) in cover (16) as shown.13. Put clean fuel on seals (17), and put them in position on cover (16).14. Install cover (16) on the housing. 15. Put seal (19) in position on the fuel transfer pump.16. Install the fuel transfer pump on the fuel injection pump housing.END BY:a. install fuel transfer pump

Have questions with 09010-07580?





Group cross 09010-07580

Back to top