Rating:
Information body assy, injecti Denso
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$43.98
01 Jan 2024
CN: Diesel Injection Par
6Pcs Tractor Fuel Engine Injection Plunger Barrel Assembly 090150-2600 2600 Fits for Injection Pumps 09010-03173 09010-03472 09010-03862 09010-03902 Compatible with HINO Tractor EH700
Generic ➽Manufacturer Part Number：090150-2600, Stamping No.: 2600. || ➽Package: 6 pieces of plungers and barrels.Neutral packing. || ➽Reference No.: 22104-1630A, 22104-1630 || ➽Notice:Please you carefully check your vehicle plunger barrel and make sure that the Part number must be completely the same as our description fitment,if you have any problem,please you contact us by email,we will have professional customer service within 24 hours. || ➽Compatible with Fuel Injection Pump:09010-03173 09010-03472 09010-03862 09010-03902 09010-03922 09010-04232 09010-04671 09010-05820 09010-05990 09010-06250
Generic ➽Manufacturer Part Number：090150-2600, Stamping No.: 2600. || ➽Package: 6 pieces of plungers and barrels.Neutral packing. || ➽Reference No.: 22104-1630A, 22104-1630 || ➽Notice:Please you carefully check your vehicle plunger barrel and make sure that the Part number must be completely the same as our description fitment,if you have any problem,please you contact us by email,we will have professional customer service within 24 hours. || ➽Compatible with Fuel Injection Pump:09010-03173 09010-03472 09010-03862 09010-03902 09010-03922 09010-04232 09010-04671 09010-05820 09010-05990 09010-06250
Scheme #.#:
№
Qty
Part num
Name
Remarks
Manufacture num
000
[01]
09010-03862
BODY ASSY, INJECTI
A6
22130-1060
HINO
Include in ##:
09010-03862
as BODY ASSY, INJECTI
Cross reference number
Part num
Firm num
Firm
Name
09010-03862
22130-1060
BODY ASSY, INJECTI
Information:
Introduction
This Special Instruction covers the removal procedure for DEF connectors on the models and applications listed above.Safety Section
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Removal Procedure for Single Clip Connectors
Illustration 2 g03468077
(1) Line
(2) Retaining Clip
Clean the area around the connector with compressed air. Be sure to remove any dirt or debris before continuing with this procedure.
Press down on the line (1).
Press IN on the retaining clip (2).
Gently pull straight up on the line.Note: Do not pull out the clip, damage will occur to the retaining clip.Note: Do not pull off the line without the clip being fully depressed, damage will occur to the retaining clip.Removal Procedure for Dual Clip Connectors
Illustration 3 g03468506
(1) Line
(2) Retaining Clips
Clean the area around the connector with compressed air. Be sure to remove any dirt or debris before continuing with this procedure.
Press down on the line (1).
Press IN on the retaining clips (2).
Gently pull straight up on the line.Note: Do not pull out the clip, damage will occur to the retaining clip.Note: Do not pull off the line without the clip being fully depressed, damage will occur to the retaining clip.
This Special Instruction covers the removal procedure for DEF connectors on the models and applications listed above.Safety Section
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Removal Procedure for Single Clip Connectors
Illustration 2 g03468077
(1) Line
(2) Retaining Clip
Clean the area around the connector with compressed air. Be sure to remove any dirt or debris before continuing with this procedure.
Press down on the line (1).
Press IN on the retaining clip (2).
Gently pull straight up on the line.Note: Do not pull out the clip, damage will occur to the retaining clip.Note: Do not pull off the line without the clip being fully depressed, damage will occur to the retaining clip.Removal Procedure for Dual Clip Connectors
Illustration 3 g03468506
(1) Line
(2) Retaining Clips
Clean the area around the connector with compressed air. Be sure to remove any dirt or debris before continuing with this procedure.
Press down on the line (1).
Press IN on the retaining clips (2).
Gently pull straight up on the line.Note: Do not pull out the clip, damage will occur to the retaining clip.Note: Do not pull off the line without the clip being fully depressed, damage will occur to the retaining clip.